IT8800 DC E-Load

Features

Widely power range:150W~600KW
Dynamic mode: up to 25 KHz
Measurement resolution:0.1mv,0.01ma
Measurement speed: up to 50KHz ·Adjustable current rising slope:0.001A/us~2.5A/us
Dynamic test, auto-test,short-circuit test function
Rotary knob, making the operation more easier
Power off memory function
CR-LED test,OCP/OPP test,Voltage rising speed test,Battery test function
External analog control ,Support VISA/USBTMC/SCPI communication protocol
Built-in RS232/USB/GPIB communication interface
Four operation mode:CC/CV/CW/CR
Remote sensing

Overview

IT8800 series(150~55KW,over 55KW customized),the programmable high-accuracy electronic load has especial LED mode which supports LED power drive test and programmable interface specifications.
To simulate LED current.The power of single channel can meet your various needs,which ranges from 150W to 55KW,the highest power is 600KW,it also has OVP/OCP/OPP/OTP.

IT8800 is with the resolution of voltage and current is 0.1mv and 0.01mA,adjustable current rising speed,0.0001A/μs-2.5A/μs adjustable space.CC/CV/CR/CP dynamic working mode,the highest testing speed of current and voltage is 50KHZ,the data memory is 100 sets.

It supplies external analog and built-in RS232,USB and GPIB to make your control the instrument more conveniently by software IT7000.

Dynamic mode: up to 25KHz.

The transient test allows switching between two different load values. The function is used to test dynamic characteristic of power supply.
Adjustable rising/falling speed of current.

List mode allows you to generate a complex current sequence. Moreover, the mode change can be synchronized with an internal or external signal, to accomplish dynamic and precise test.A list file includes following parameters: file name, step counts (range 2-84), time width of single step (0.00002s~3600s),step value and slope. The LIST function can make many kinds of complex sequences, to meet complicated test requirements. The slope range is 0.0001A/us~2.5A/us.