Resistance Standards for Precision DC Measurement
Model 2792A resistors are low- to high-value resistance standards for accurate DC measurements in combination with a potentiometer or bridge, available from 0.001 Ω to 1 MΩ. The resistor elements of the 0.001 Ω to 1 kΩ models (four-terminal construction) use selected manganin wire; the 100 kΩ and 1 MΩ models (three-terminal construction) use nickel and chromium wire. All resistors are fully processed to assure the permanence of resistance.
Key Features
- Low- to high-value resistance standards – 0.001 Ω to 1 MΩ in 10 steps
- Calibrated limit of error ±10 ppm to ±100 ppm
- Suitable for precision DC measurements using a potentiometer or bridge
- Testing resistors yields accuracy of ±5 ppm
- Selected manganin wire elements on four-terminal models
- Nickel-chromium wire elements on the three-terminal 100 kΩ and 1 MΩ models
- Each unit ships with a test certificate
Specifications
| Power rating | 3 W |
| Dielectric strength | 1500 V AC for one minute |
| Temperature coefficient α20 | −5 to +15 ×10⁻⁶/°C (2792A01–02); −5 to +10 ×10⁻⁶/°C (others) |
| Accuracy reference | At 20 ±0.1 °C; calibrated limit of error at 20 ±0.2 °C |
| Supplied with | Test certificate (1 copy) |
Models
| Model | Nominal value | Terminals | Accuracy | Calibrated limit of error |
|---|---|---|---|---|
| 2792A01 | 0.001 Ω | 4-terminal | ±0.02% | ±0.01% |
| 2792A02 | 0.01 Ω | 4-terminal | ±0.01% | ±0.005% |
| 2792A03 | 0.1 Ω | 4-terminal | ±0.005% | ±0.001% |
| 2792A04 | 1 Ω | 4-terminal | ±0.005% | ±0.001% |
| 2792A05 | 10 Ω | 4-terminal | ±0.005% | ±0.001% |
| 2792A06 | 100 Ω | 4-terminal | ±0.005% | ±0.001% |
Higher-value standards – 1 kΩ, 100 kΩ and 1 MΩ – are also available in the 2792A range. Contact DCT for the exact model number and current availability.


Leave a Reply