Overview

LED Digital Clocks for In-Wall Mounting with stopwatch mode (optional), ideal for surgical operating rooms
These LED digital clocks with stainless steel V4A cases were designed with the surgical operating room in mind. They are mounted in-wall, flush with the surface, to meet all hygienic standards. Configured in this type of case or in any other case adapted to customer’s wishes, e. g. for on-wall mounting, for desk-top use or, as a double-faced clock, these clocks can be used in any demanding environment, such as the pharmaceutical, beverage and food industries, requiring accurate and dependable time information.

very high grade stainless steel case (1.4571 X6CrNiMoTi 17-12-2, German trade name V4A), for mounting flush with wall tiles or plaster. Visible surface with a matted finish, resistant to acids, detergents and disinfectants. In mounted condition protected against dust and moisture to IP 54 (EN 60529).

Mounting
built-in/plaster, in stud-and-panel wall, on-wall mounting (optional). be suspended from the ceiling on brackets (optional). A metal mounting frame for conventional brick walls or a spring-clip device for stud-and-panel walls is supplied with the clock. Optionally, at a surcharge, the clock may also be configured for on-wall mounting or as a double faced version

LED digital display
6-digits, 2 each for hours, minutes and seconds. 7-segment LED bars, red as standard, amber or green as options. Digit height 57 mm for hour, minute and second. Second digit height 38 mm as an option. Automatic brightness control. Readability is excellent even at extremely sharp angles.

Power supply
230 VAC/50 Hz is standard, 12 VDC mains is optional. Under specific circumstances,the bus voltage may suffice to operate PEWETA DCFport24 version clocks2). Existing 2-wire or 4-wire slave clock bus lines may be re-used for 12 VDC or PEWETA DCFport24 versions.

Stopwatch mode (optional)
These clocks can be fitted with a count up/split time stopwatch mode. The 6-digit LED display will show hours, minutes and seconds, counting up from start. The stopwatch system is controlled by a wire-based remote control unit (as an extra), for technical data see page 126.