- Redundant Power 48VDC (46~57VDC) dual input power
- PoE+ Output 16 ports, IEEE 802.3af/at, 30W per port (360W total)
- Cable Diagnostics Identifies open/short distances
- Ring Redundancy Supports 5 ring instances (μ-Ring, μ-Chain, Sub-Ring)
- Fast Recovery μ-Ring with <10ms recovery in up to 250 devices
- Time Sync Supports IEEE 1588 PTP V2 for precise synchronization
- EMS Management Fully supports EMS management tools
Industrial Managed FE PoE Switch IFS-1608GSM-16PH
- 16x PoE+ Ports 16 x 10/100Mbps RJ45 ports, delivering up to 30W per port (360W total), compliant with IEEE 802.3af/at standards, for powering devices like IP cameras and Wi-Fi APs.
- 8x SFP Slots 8 x 100/1000Base-X SFP slots for flexible fiber connectivity.
- Redundant Power 48VDC dual input power (46~57VDC) for reliable operation.
- Ring Redundancy Supports 5 ring instances (μ-Ring, μ-Chain, Sub-Ring) with recovery times under 10ms for robust network uptime.
- Industrial-Grade Design DIN-rail mountable, fanless, surge-protected, with wide temperature range and safety certifications for demanding environments.
The IFS-1608GSM-16PH is a robust 16-port industrial PoE Ethernet switch with 8 additional 100/1000Base-X SFP slots, designed for demanding network environments. This Layer 2 managed switch supports IEEE 802.3af/at PoE+ standards, delivering up to 30W of power per port (total 360W) to power devices such as IP cameras, Wi-Fi access points, alarm systems, and smoke sensors. It operates with redundant 48VDC power input (46~57VDC) and features a fanless, DIN-rail mountable design with enhanced surge protection, making it suitable for harsh industrial conditions. The switch also supports advanced network redundancy features, including 5 ring instances (μ-Ring, μ-Chain, Sub-Ring) with recovery times under 10ms, IEEE 1588 PTP V2 for precise time synchronization, and cable diagnostics to identify faults like open or short circuits. With EMS management support and safety certifications, it meets the stringent requirements of critical, centralized systems.
Specifications
Standard | IEEE 802.3 | 10Base-T 10Mbit/s Ethernet |
IEEE 802.3u | 100Base-TX, 100Base-FX, Fast Ethernet | |
IEEE 802.3z | 1000Base-X Gbit/s Ethernet over Fiber-Optic | |
IEEE 802.3af | PoE (Power over Ethernet) | |
IEEE 802.3at | PoE+Â (Power over Ethernet enhancements) | |
IEEE 802.1d | STP (Spanning Tree Protocol) | |
IEEE 802.1w | RSTP (Rapid Spanning Tree Protocol ) | |
IEEE 802.1s | MSTP (Multiple Spanning Tree Protocol) | |
ITU-T G.8032 / Y.1344 | ERPS (Ethernet Ring Protection Switching) | |
ITU-T G.8031 / Y.1342 | EPS (Ethernet Protection Switching) | |
IEEE 802.1Q | Virtual LANs (VLAN) | |
IEEE 802.1X | Port based and MAC based Network Access Control, Authentication | |
IEEE 802.3ac | Max frame size extended to 1522Bytes | |
IEEE 802.3ad | Link aggregation for parallel links with LACP (Link Aggregation Control Protocol) | |
IEEE 802.3x | Flow control for Full Duplex | |
IEEE 802.1ad | Stacked VLANs, Q-in-Q | |
IEEE 802.1p | LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization | |
IEEE 802.1ab | Link Layer Discovery Protocol (LLDP) | |
IEEE 802.3az | EEE (Energy Efficient Ethernet) |
Switch Architecture | Back-Plane (Switching Fabric): 19.2Gbps (Full Wire-Speed) | |||
Data Processing | Store and Forward | |||
Flow Control | IEEE 802.3x for full duplex mode Back pressure for half duplex mode | |||
Network Connector | 16x 10/100Base-TX RJ-45 + 8x 100/1000Base-X SFP | |||
RJ-45 UTP port supports, Auto negotiation speed, Auto MDI/MDI-X function | ||||
SFP port supports 100/1000M dual speed with DDMI | ||||
Console | RS-232 (RJ-45) | |||
PoE Standard & RJ-45 Pin
Assignment |
16x IEEE 802.3af /IEEE 802.3at PoE+
2 pairs PoE, PoE+, 30W/port End-Span, Alternative A mode. Positive (V+) : RJ-45 pin 1, 2. Negative (V-) : RJ-45 pin 3, 6. |
|||
Network Cable | UTP/STP Cat. 5e cable or above | |||
EIA/TIA-568 100-ohm (100meter) | ||||
Protocols | CSMA/CD | |||
Reverse Polarity Protection | Supported for power input | |||
Overload Current Protection | Supported | |||
CPU Watch Dog | Supported | |||
Power Supply | Redundant Dual DC 48V (46~57VDC) input power, Removable terminal block
(50~57V input is recommended for IEEE 802.3at PoE+) |
Power Consumption
Input Voltage | Total Power Consumption | Device Power Consumption | PoE Budget |
52 VDC | 382W | 16W | 360W |
PoE Power Budget | Maximum PoE Output power budget 30W/port, Total 360W | ||||
LED | System: Power 1 (Green), Power 2 (Green), Fault (Amber), CPU Act (Green), Ring Master (Yellow) | ||||
UTP: 10/100 Link/Active (Green) | |||||
SFP Slot: Link/Active (Green) | |||||
PoE: ON (Green) | |||||
Jumbo Frame | 9.6KB | ||||
IEEE802.3ac | Max frame size extended to 1522Bytes (allow Q-tag in packet) | ||||
MAC Address Table | 8K | ||||
Memory Buffer | 512K Bytes for packet buffer | ||||
Device Memory | 16M Bytes Flash ROM, 128M Bytes RAM | ||||
Warning Message | System Syslog, SMTP/ e-mail event message, alarm relay | ||||
Alarm Relay Contact | Relay outputs with current carrying capacity of 1A @24VDC | ||||
DI Input | DI 17 to 30 V for state 1, 0 to 15 V for state 0 | ||||
Removable Terminal Block | Provides 2 terminal block for Alarm relay, DI, redundant power PWR1 and PWR2 | ||||
Operating Temperature | -10 ~ 60°C (IFS-1608GSM-16PH)
-40 ~ 75°C (IFS-1608GSM-16PHE) |
||||
Operating Humidity | 5% to 95% (Non-condensing) | ||||
Storage Temperature | -40 ~ 85°C | ||||
Housing | Rugged Metal, IP30 Protection, Fanless | ||||
Dimensions | 135.6 x 99 x 160mm (D x W x H) | ||||
Weight | 2.5kg | ||||
Installation Mounting | DIN Rail mounting or wall mounting (Optional) | ||||
MTBF | 436,353 Hours (MIL-HDBK-217) | ||||
Warranty | 5 years | ||||
Certification | |||||
EMC | CE (EN55024, EN55032) | ||||
EMI (Electromagnetic
Interference) |
FCC Part 15 Subpart B Class A, CE | ||||
EMSÂ EN61000-4-2 (ESD) Level 3, Criteria B | |||||
(Electromagnetic
Susceptibility) Protection Level |
EN61000-4-3 (RS) Level 3, Criteria A | ||||
EN61000-4-4 (Burst) Level 3, Criteria A | |||||
EN61000-4-5 (Surge) Level 3, Criteria B |
EMS (Electromagnetic
Susceptibility) Protection Level |
EN61000-4-6 (CS) Level 3, Criteria A |
EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A | |
Safety | EN62368-1 |
Railway Traffic | EN50121-4 |
Immunity for Heavy Industrial Environment | EN61000-6-2 |
Emission for Heavy Industrial Environment | EN61000-6-4 |
Surge Protection | 4KV for PoE, UTP and Fiber ports |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Software Specifications
Topology | |
VLAN | IEEE 802.1q VLAN, up to 4094 802.1Q VLAN ID |
IEEE 802.1q VLAN, up to 4094 Groups | |
IEEE 802.1ad Q-in-Q | |
MAC-based VLAN, up to 256 entries | |
IP Subnet-based VLAN, up to 128 entries | |
Protocol-based VLAN (Ethernt, SNAP, LLC), up to 128 entries | |
VLAN Translation, up to 256 entries | |
Private VLAN for port isolation | |
GVRP (GARP VLAN Registration Protocol) | |
MVR (Multicast VLAN Registration) | |
Voice VLAN | |
Link Aggregation
(Port Trunk) |
Static (Hash with SA, DA, IP, TCP/UDP port), up to 5 trunk group |
Dynamic (IEEE 802.3ad LACP), up to 5 trunk group | |
Spanning Tree | IEEE 802.1d STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP |
Multiple µ-Ring | Up to 5 instances that each supports μ-Ring, μ-Chain or Sub-Ring type for U uses, and maximum up to 5 Rings |
Recovery time <10ms | |
The maximum number of device is allowed 250 nodes in a Ring. | |
Loop Protection | Supported |
ITU-T G.8032 / Y.1344 ERPS
(Ethernet Ring Protection) |
Recovery time <50ms |
Single Ring, Sub-Ring, Multiple ring topology network | |
ITU-T G.8031 / Y.1342 EPS
(Ethernet Protection Switching) |
Supported |
QoS Features | |
Class of Service | IEEE 802.1p 8 active priorities queues for per port |
Traffic Classification QoS | IEEE 802.1p based CoS, IP Precedence based CoS, IP DSCP based CoS |
QCL (QoS Control List): Frame Type, Source/Destination MAC, VLAN ID, PCP, DEI, Protocol, Source IP, IP Fragment, DSCP, TCP/UDP port number | |
Bandwidth Control for Ingress | 100~1,000,000 when the “Unit” is “kbps”, and 1~1,000 when the “Unit” is “Mbps” |
Bandwidth Control for Egress | 100~1,000,000 when the “Unit” is “kbps”, and 1~1,000 when the “Unit” is “Mbps” |
Per queue / Port shaper | |
DiffServ (RF 2474) Remarking | |
Storm Control | For Unicast, Broadcast and Multicast |
IP Multicasting Features | |
IGMP / MLD Snooping | IGMP Snooping v1, v2, v3 / MLD Snooping v1, v2 |
Port Filtering Profile | |
Throttling | |
Fast Leave | |
Maximum Multicast Group : up to 1022 entries | |
Query / Static Router Port |
Security Features | |
IEEE 802.1X | Port-Based |
MAC-Based | |
ACL | Number of rules : up to 256 entries |
for L2 / L3 / L4
L2 : Mac address SA/DA/VLAN L3: IP address SA/DA, Subnet L4: TCP/UDP |
|
RADIUS | Authentication & Accounting |
TACACS+ | Authentication |
HTTPS, HTTP | Supported |
SSL / SSH v2 | Supported |
User Name Password
Authentication |
Local Authentication |
Remote Authentication (via RADIUS / TACACS+) | |
Management Interface Access Filtering | Web, Telnet / SSH, CLI RS-232 console |
Management Features | |
CLI | Cisco® like CLI |
Web UI | Supported |
Telnet | Server |
SNMP | V1, V2c, V3 |
sFlow | Supported |
Modbus/TCP | Supports for management and monitoring |
SW & Configuration Upgrade | TFTP, HTTP |
Redundant firmware in case of upgrade failure | |
FTP client | Supports for upload/download configuration |
RMON | RMON I (1, 2, 3, 9 group), RMON II |
MIB | RFC1213 MIB II, Private MIB |
UPnP | Supported |
BOOTP | Supported |
DHCP | Server, Client, Relay, Relay option 82, Snooping |
RARP | Supported |
IP Source Guard | Supported |
Port Mirroring | Supported |
Event Syslog | Syslog server (RFC3164) |
Warning Message | System syslog, e-mail, alarm relay |
DNS | Client, Proxy |
IEEE1588 PTP V2 | Supports 5 operating mode in each port :
Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave |
NTP, SNTP | Client |
LLDP (IEEE 802.1ab) | Link Layer Discovery Protocol |
LLDP-MED | |
IPv6 Features | |
IPv6 Management | Telnet Server/ICMP v6 |
SNMP over IPv6 | Supported |
HTTP over IPv6 | Supported |
SSH over IPv6 | Supported |
IPv6 Telnet | Supported |
IPv6 NTP, SNTP | Client |
IPv6 TFTP | Supported |
IPv6 QoS | Supported |
IPv6 ACL | Number of rules: up to 256 entries |
for L2 / L3 / L4
L2 : Mac address SA/DA/VLAN L3: IP address SIP, Subnet (32bit) L4: TCP/UDP |
Others Features | |
Green Ethernet | Supports IEEE 802.3az EEE (Energy Efficient Ethernet) Management to optimize the power consumption |
Determine the cable length and lowering the power for ports with short cables | |
Lower the power for a port when there is no link | |
LED Power Management :Adjustment LEDs intensity | |
Cable Diagnostic | Measuring UTP cable normal or broken point distance |
Advanced PoE | |
Management | PoE PD failure auto checking, and auto reset when PD fail PoE port on/off weekly scheduling
PoE Configuration PoE Enable/Disable Power limit by classification Power feeding priority Total PoE power budget limitation: maximum 360W |
Optional Accessories
Wall Mount Kit | |
IND-WMK04 | Wall Mount kit for Industrial product (Wide) (2 pcs in 1 set, 76mm x 75mm x 2pcs) |
Industrial SFP Transceiver
The ISFP series of industrial grade SFP modules have been fully tested with all CTC Union industrial grade Ethernet switches for guaranteed compatibility and performance. Best performance can be guaranteed, even in mission-critical applications. (Please see CTC Union’s Industrial SFP datasheets for more items and detailed information.)
ISFP-M7000-85-D(E) | Industrial SFP GbE 1000Base-SX, M/M, 500 meter,wave length 850nm, 7.5dB, LC, DDMI, -10~70°C (-40~85°C) |
ISFP-S7020-31-D(E) | Industrial SFP 1000Base-LX, S/M, 20km, wave length 1310nm, 15dB, LC, DDMI, -10~70°C (-40~85°C) |
ISFP-T7T00-00-(E) | Industrial SFP 10/100/1000Base-T UTP 100meter, -10~70°C (-40~85°C) |
ISFP-M5002-31-D(E) | Industrial SFP 155M 100Base-FX, MM, 2km, wave length 1310nm, 12dB, LC, DDMI, -10~70°C (-40~85°C) |
ISFP-S5030-31-D(E) | Industrial SFP 155M 100Base-FX, SM, 30km, 1310nm, 19dB, LC, DDMI, -10~70°C (-40~85°C) |
Industrial Power Supply
NDR-480-48 |
|
Â
Enjoy:
- Nearly 30 Years of Experience
- Reliable Suppliers
- Quality Products
- Free Technical Consultation
- Tailoring Custom Solution
- Expert Technical Support
- No Hidden-Fees
Send Enquiry For:
Industrial Managed FE PoE Switch IFS-1608GSM-16PH
Israel's Leading Businesses Choose DCT
Israel's Leading Businesses Choose DCT
DCT’s Skilled Management Team has more than twenty-five years of experience and expertise in the local business environment, coupled with a highly motivated group of employees, positions us as the preferred supplier among the major customers in the industry.
DCT Competitive Edge is the prompt response to our customer needs, the online and on-site direct technical support, professional consulting for the best cost/performance solution, on-time delivery, long-term maintenance, and support.
Still Conflicted? Let's Talk.
We can get back to you!