Overview
The ITP-12164XTM-12PH is an EN50155-certified managed 10G PoE switch, designed for railway, rolling stock, and heavy industrial applications. It features 4x 10G M12 X-code ports, 16x Gigabit M12 X-code ports, and 12x Fast Ethernet M12 D-code ports. The switch supports 12 PoE+ ports (80W total power budget) with regulated 52VDC PoE output voltage, ensuring stable power delivery over long distances.
Built with rugged M12 connectors, this switch is shock and vibration resistant, meeting EN50155, EN50121-4, and EN45545-2 railway safety standards. It supports µ-Ring, ERPS, MSTP, TTDP, and EMS management, providing high-speed, redundant, and reliable network communication in extreme environments.
Performance & Networking
- High-Speed Switching Capacity – 114.4Gbps backplane with full wire-speed switching.
- Advanced Layer 3 Routing – Supports IPv4/IPv6 Static Routing, OSPF, RIP, and VRRP.
- Redundant Ring Protocols:
- µ-Ring, µ-Chain, and Sub-Ring (Supports up to 5 rings, 250 devices per ring).
- STP, RSTP, MSTP for loop prevention.
- ITU-T G.8031 ERP & G.8032 ERPS for fast network recovery (<50ms).
Industrial-Grade Power Input
- Redundant Dual Isolated DC Input – 24/48/72/96/110VDC (16.8~137.5VDC) range.
- Regulated PoE Output – 52VDC PoE stabilization for long-distance power transmission.
- Reverse Polarity & Overload Protection.
Power over Ethernet (PoE) Capabilities
- 12 PoE+ Ports – Supports IEEE 802.3af/at PoE+.
- Maximum PoE Budget: 80W (30W per port).
- PoE Power Allocation Features:
- Auto Checking & Auto Reset when PoE PD Fails.
- PoE Scheduling (On/Off weekly configuration).
- Power Limit by Classification & Management.
- Total PoE Power Budget Limitation.
Security & Authentication
- IEEE 802.1X Port-Based & MAC-Based Authentication.
- Access Control Lists (ACLs) for L2/L3/L4 (256 rules).
- RADIUS & TACACS+ Authentication and Accounting.
- SSL, SSH v2 for Secure Management.
- IP Source Guard & DHCP Snooping.
Management & Monitoring
- CLI (Cisco-like Command Line Interface).
- Web UI & SNMP v1/v2c/v3 Management.
- Modbus/TCP for Industrial Automation Monitoring.
- Syslog, Email Alerts, and Alarm Relay for Event Warnings.
- Port Mirroring for Traffic Analysis.
QoS & Traffic Management
- IEEE 802.1p QoS with 8 Priority Queues per Port.
- Traffic Prioritization Based on:
- 802.1p, IP Precedence, DSCP.
- MAC Address, VLAN ID, TCP/UDP Ports.
- Packet Type, Frame Type.
- Bandwidth Control:
- Ingress: 100 Kbps – 1 Gbps.
- Egress: 100 Kbps – 1 Gbps.
- Storm Control for Unicast, Broadcast, and Multicast Traffic.
VLAN & Link Aggregation
- IEEE 802.1Q VLAN (Up to 4094 VLANs).
- IEEE 802.1ad Q-in-Q VLAN.
- MAC-Based VLAN (256 entries).
- IP Subnet-Based VLAN (128 entries).
- Protocol-Based VLAN (Ethernet, SNAP, LLC – 128 entries).
- Private VLAN for Port Isolation.
- IEEE 802.3ad Link Aggregation (Supports up to 16 trunk groups).
- IEEE 802.1AX Passive & Active Mode.
IP Multicasting Support
- IGMP Snooping v1/v2/v3 & MLD Snooping v1/v2.
- Multicast Filtering, Throttling, & Fast Leave.
- Maximum Multicast Group Entries: 1022.
Hardware Specifications
Interfaces & Ports
- 12x M12 D-code Female Ports (10/100Base-TX, 8 with PoE).
- 16x M12 X-code Female Ports (10/100/1000Base-T, 4 with PoE).
- 4x 10G M12 X-code Female Ports (Supports 1G/2.5G/5G/10G).
- 1x RS-232 Console Port (5-pin M12 A-code Male).
- 2x Rotary Switches (IP & Gateway Settings).
LED Indicators
- Power System: Power 1 (Green), Power 2 (Green), Fault (Amber), CPU (Green), Ring Master (Amber).
- UTP Ports: 10/100/1G/2.5G/5G Link (Green), 10G Link (Blue).
- PoE Ports: Active PoE (Green).
Environmental & Mechanical Specifications
- Operating Temperature: -40°C ~ 60°C.
- Storage Temperature: -40°C ~ 85°C.
- Humidity: 5% – 95% (Non-condensing).
- Enclosure: Rugged Metal, Fanless, IP40 Protection.
- Dimensions: 128 x 418 x 207mm (D x W x H).
- Weight: 8.1 kg.
- Installation: Wall Mounting.
- MTBF: 90,646 Hours (MIL-HDBK-217).
Railway & Industrial Certifications
- EN50155 & EN50121-4 Railway Traffic Certification.
- EN45545-2 Fire Protection for Railway Vehicles.
- IEC61373 Shock & Vibration Protection.
EMC & Safety Certifications
- CE, FCC Certified.
- EN61000-6-2 (Heavy Industrial Immunity).
- EN61000-6-4 (Heavy Industrial Emissions).
Environmental Protections
- Electrostatic Discharge (ESD): EN61000-4-2 (Level 3).
- Radiated Susceptibility (RS): EN61000-4-3 (Level 3).
- Electrical Fast Transients (EFT): EN61000-4-4 (Level 3).
- Surge Protection: EN61000-4-5 (Level 3).
Ordering Information
Model |
Total Ports |
FE M12 |
GbE M12 |
10G M12 |
PoE Ports |
PoE Budget |
Power Input |
Certifications |
Temperature |
ITP-12164XTM-12PH |
32 |
12 |
16 |
4 |
12 |
80W |
24/48/72/96/110VDC |
EN50155, EN50121-4, EN45545-2, CE, FCC |
-40~60°C |