Specifications

 

Standard                 IEEE 802.3        10Base-T 10Mbit/s Ethernet

IEEE 802.3u     100Base-TX, 100Base-FX, Fast Ethernet IEEE 802.3ab  1000Base-TGbit/s Ethernet over twistedpair

 

Switch Architecture

 

Back-plane (Switching Fabric): 48Gbps

Full wire-speed

 

IEEE 802.3z

1000Base-X Gbit/s Ethernet over Fiber-Optic

IEEE 802.3af      PoE (Power over Ethernet)

Data Processing      Store and Forward

Flow Control            IEEE 802.3x for full duplex mode Back pressure for

half duplex mode

 

IEEE 802.3at     PoE+ (Power over Ethernet enhancements) IEEE 802.1d               STP (Spanning Tree Protocol)

IEEE 802.1w     RSTP (Rapid Spanning Tree Protocol ) IEEE 802.1s               MSTP (Multiple Spanning Tree Protocol) ITU-T G.8032 / ERPS (Ethernet Ring Protection

Network Connector

16x 10/100/1000Base-T RJ-45+ 8x 100/1000Base-X

SFP connector

RJ-45 UTP port support Auto negotiation speed, Auto MDI/MDI-X function,

SFP port support dual speed with DDMI

 

Y.1344

Switching)

PoE standard &

8x IEEE 802.3af/at PoE+

 

IEEE 802.1Q      Virtual LANs (VLAN)

IEEE 802.1X

Port based and MAC based Network Access Control, Authentication

                                IEEE 802.3ac     Max frame size extended to 1522Bytes.

Standard                 IEEE 802.3ad     Link aggregation for parallel links with

                        LACP(Link Aggregation Control Protocol)

 IEEE 802.3x       Flow control for Full Duplex              

RJ-45 Pin

Assignment

 

Console Network Cable

2 pairs PoE, PoE+, 30W/port End-Span, Alternative A mode. Positive (V+) : RJ-45 pin 1, 2.

Negative (V-) : RJ-45 pin 3, 6.

RS-232 (RJ-45)

 UTP/STP Cat. 5e cable or above                            EIA/TIA-568 100-ohm (100meter)

 

 IEEE 802.1ad   Stacked VLANs, Q-in-Q                     

Protocols              CSMA/CD

 

IEEE 802.1p     LAN Layer 2 QoS/CoS Protocol for

                       Traffic Prioritization                          

 IEEE 802.1ab     Link Layer Discovery Protocol (LLDP)

Reverse Polarity Protection Overload Current

Protection

Supported

Supported

 

                                IEEE 802.3az      EEE (Energy Efficient Ethernet)          

VLAN ID                  4094 IEEE 802.1Q VLAN VID

 

CPU Watch Dog       Supported

Input Voltage Total Power Consumption Device Power Consumption PoE Power Budget 50VDC 260.8 20.8W 240W

Power Supply Redundant Dual DC 48VDC (44~57VDC) Input power Removable Terminal Block for input power connector (50~57V input is recommended for IEEE 802.3at PoE+

Housing                  Rugged Metal, IP30 Protection, Fanless

Dimensions          116 x 92 x 160 mm (Dx Wx H)

Weight                  1.375g

 

Power

in 30W applications)

Installation Mounting

DIN Rail mounting, or wall mounting (optional)

 

Consumption

 

LED                         Per unit: Power 1 (Green), Power 2 (Green), Fault

 (Amber), CPU Act (Green), Ring Master (Yellow)          

Per RJ-45 port: 10/100 Link/Active (Green)

                      1000 Link/Active (Amber)                   

MTBF                     403,331 Hours (MIL-HDBK-217)

Warranty                5 years

EMC                       CE (EN55024, EN55032)

EMI

 

 SFP Fiber Per port: Link/Active (Green)                 PoE Port LED, 1 LED /per Port :

(Electromagnetic Interference)

FCC Part 15 Subpart B Class A, CE

 

PoE Output Power On : ON (Green)

                                                          PoE Output Power OFF : OFF          

Railway Traffic      EN50121-4

Immunity for

 

Jumbo Frame          9.6KB

IEEE 802.3ac         Max frame size extended to 1522Bytes (allow Q-tag

                                in packet)                                                             

 MAC Address Table 8K                                                                        

 Memory Buffer        512K Bytes for packet buffer                                     

 Device Memory     16M Bytes Flash ROM, 128M Bytes RAM                      

 Warning Message System Syslog, SMTP/ e-mail event message, alarm relay

Heavy Industrial Environment Emission for Heavy Industrial Environment

EMS

(Electromagnetic Susceptibility)

EN61000-6-2

 

EN61000-6-4

 EN61000-4-2 (ESD) Level 3, Criteria B                         

 EN61000-4-3 (RS) Level 3, Criteria A                           

 EN61000-4-4 (Burst) Level 3, Criteria A                       

 

Alarm Relay Contact Removable

Relay outputs with current carrying capacity of 1 A @24VDC

Provide 2 redundant power, alarm relay contact, 6

Protection Level

 EN61000-4-5 (Surge) Level 3, Criteria B                      

 EN61000-4-6 (CS) Level 3, Criteria A                      EN61000-4-8 (PFMF, Magnetic Field) Field Strength:

 

 Terminal Block        Pin                                                                                                             300A/m, Criteria A

 

Operating Temperature Operating

-10 ~ 60°C (IGS-1608SM-SE-8PH)

-40 ~ 75°C (IGS-1608SM-SE-8PHE)

5% to 95% (Non-condensing)

Safety                   UL60950-1, EN60950-1, EN62368-1

Surge protection     4KV for UTP and Fiber ports

Shock                    IEC 60068-2-27

 

 Humidity                                                                                            

Freefall                   IEC 60068-2-32

 

Storage

-40 ~ 85°C

Vibration              IEC 60068-2-6

 

 Temperature                                                                                      

Software Specifications

Topology                                                                                           VLAN   IEEE 802.1q VLAN,up to 4094 802.1Q VLAN VID              

 IEEE 802.1q VLAN,up to 4094 Groups                         

 IEEE 802.1ad Q-in-Q                                                  

 

Bandwidth Control for Ingress

Bandwidth

 

 

100~1,000,000 when the “Unit” is “kbps” and 1~1,000 when the “Unit” is “Mbps”

100~1,000,000 when the “Unit” is “kbps”

 

 MAC-based VLAN,up to 256 entries                            

 IP Subnet-based VLAN, up to 128 entries                    

 Protocol-based VLAN(Ethernt, SNAP, LLC), up to 128 entries

 VLAN Translation, up to 256 entries                           

Control for Egress  and 1~1,000 when the “Unit” is “Mbps”                   Per queue / Per port shaper

DiffServ (RF 2474) Remarking

Storm Control        for Unicast, Broadcast, Multicast

 

 

 

 

Link Aggregation (Port Trunk)

 Private VLAN for port isolation                                  

 GVRP (GARP VLAN Registration Protocal)                  MVR ( Multicast VLAN Registration)

Static (Hash with SA, DA, IP, TCP/UDP port), Maximum

 trunk group : 12group                                              

Dynamic (IEEE 802.3ad LACP), Maximum trunk group :

IGMP / MLD

Snooping

 IGMP Snooping v1, v2, v3 / MLD Snooping v1, v2          

 Port Filtering Profile                                                 

 Throttling, Fast Leave                                              

Security Features

 Maximum Multicast Group : up to 1022 entries         Query / Static Router Port

 

 12group                                                                Per group up-to 8 port

Spanning Tree      IEEE 802.1d STP                                                       

 IEEE 802.1w RSTP                                                    IEEE 802.1s MSTP

Multiple µ-Ring      up to 5 instances that each supports µ-Ring, µ-Chain or

Sub-Ring type for flexible uses, and maximum up to 5 Rings. Recovery time <10ms

The maximum number of devices allowed in a Ring supported ring is 250.

(Please see CTC Union μ-Ring white paper for more

IEEE 802.1X           Port-Based                                                              MAC-Based

ACL                        Number of rules : up to 256 entries                            

for L2 / L3 / L4

L2 : Mac address SA/DA/VLAN L3: IP address SA/DA, Subnet L4: TCP/UDP

RADIUS authentication & accounting

TACACS+ authentication & accounting, TACACS+ 3.0 HTTPS, HTTP      Supported

SSL / SSH v2            Supported

 

details and more topology applications)

Loop Protection     Supported

User Name Password

 Local Authentication                                               

Remote Authentication (via RADIUS / TACACS+)

 

ITU-T G.8032 /

Recovery time <50ms

Authentication

 

Management Features

Y.1344 ERPS                                                                                               Management

 

(Ethernet Ring Protection)

Single Ring, Sub-Ring, Multiple ring topology network

Interface Access Filtering

Web, Telnet / SSH , CLI RS-232 console

 

 QoS Features                                                                                      Class of Service     IEEE 802.1p 8 active priorities queues for per port                             

CLI                         Cisco® like CLI

 

Traffic

 IEEE 802.1p based CoS                                              

Web Based Management

 

Classification QoS  IP Precedence based CoS                                          

 IP DSCP based CoS                                               QCL(QoS Control List): Frame Type, Source/

 Destination MAC, VLAN ID, PCP, DEI                            

QCE(QoS Control Entry): Protocol, Source IP, IP Fragment, DSCP, TCP/UDP port number

 

Telnet                    Server

SNMP                     V1, V2c, V3

Modbus TCP          supported

SW & Configuration Upgrade

 TFTP, HTTP, FTP client                                           Redundant firmware in case of upgrade failure

IPv6 Telnet         Supported IPv6 NTP, SNTP Client IPv6 TFTP   Supported

 

RMON                    RMON I (1, 2, 3, 9 group), RMON II

MIB                        RFC1213 MIB II, Private MIB

UPnP                    Supported

BootP                   Bootstrap Protocol Supported

RARP                    Reverse Address Resolution Protocol Supported

DHCP                     Server, Client, Relay, Relay option 82 , Snooping

IP Source Guard       Supported

Port Mirroring     Supported

Event Syslog         Syslog server (RFC3164) Warning Message System syslog, e-mail, alarm relay DNS    Client, Proxy

SyncE                     ITU-T G.8262 Sync Ethernet

IPv6 QoS               Supported

IPv6 ACL               Number of rules: up to 256 entries                          for L2 / L3 / L4

L2 : Mac address SA/DA/VLAN L3: IP address SIP, Subnet (32bit) L4: TCP/UDP

Green Ethernet      Supports IEEE 802.3az EEE (Energy Efficient Ethernet)

 Management to optimize the power consumption       

Determine the cable length and lowering the power

 for ports with short cables                                        

 Lower the power for a port when there is no link        

 

 

IEEE1588 PTP V2      Support 5 operating mode in each port :

Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave

NTP, SNTP              Client

Cable Diagnostic Advanced PoE

LED Power Management :Adjustment LEDs intensity

Measuring UTP cable normal or broken point distance

PoE PD failure auto checking, and auto reset when PD fail

 

IPv6 Features

LLDP (IEEE 802.1ab)

 Link Layer Discovery Protocol                             LLDP-MED

Management

PoE port on/off weekly scheduling

PoE Configuration PoE Enable/Disable

Power limit by classification

 

IPv6 Management Telnet Server/ICMP v6

SNMP over IPv6 Supported HTTP over IPv6 Supported SSH over IPv6  Supported

 

Power feeding priority

Total PoE Power budge limitation: Maximum 240W