16x/8x E1/T1 and 4x GbE Managed Fiber Multiplexer FMUX1600B-AD

Features

Provides 16 / 8 E1 / T1 G.703 transparent transmission over fiber
Provides 4x 10 / 100 / 1000 Mbit / s Ethernet Ports and 1x RS232 ch.
Provides one RS232 channel
Loopback test on E1 / T1 fiber port
Provides one hotline channel (order-wire)
Supports full / half duplex, 10M / 100M / 1000M, auto-Negotiation
Forward 10K byte jumbo packets on Ethernet port
Supports 1+1 fiber line protection. Less than 50ms
Complete alarm function and can monitor remote device status
Power combination AC220V and DC-48V for redundant options
Supports RS232 local management; Supports on-line f / w upgrade
Supports Web, Telnet, SNMP management (optional)

The 1U 19″ rack mountable, PDH fiber optical Multiplexer transmits up to 16 / 8 E1 / T1 + 4 x 10 / 100 / 1000Base-T Gigabit Ethernet over a single fiber optic link. The FMUX1600 / FMUX800 chassis in available in three different power configurations; single AC, single DC, or AC+DC. The AC supplies operate from 90 ~ 240VAC while DC supplies operate from 18 ~ 60VDC. On the rear of the chassis, the BNC model provides 32 / 16 unbalanced 75 Ohm coaxial connections with BNC connectors while the RJ-45 model provides 16 / 8 balanced 120 Ohm connections over twisted pair wiring with RJ45 connectors.

With two SFP sockets on fiber ports, the FMUX1600 / FMUX800 gives you the fiber cabling connector SFP-LC, both multi-mode and single-mode are available as well as BiDi which allows bi-directional transmissions using only a single fiber cable. 1+1 Automatic optical line protection is also supported for the aggregate fiber ports. The standard FMUX1600 / FMUX800 configuration may be viewed or set via serial VT-100 terminal connection or SNMP card with web, telnet, and SNMP management.

Specifications

Category	Specification
Optical Interface	Connector: SFP-LC
	Data Rate: 1.25Gbps
	Bit Error Rate: Less than 10-11
	Distance (MM): 2km, SM: 15/30/50/80/120km
	Wavelength WDM: 20/40/60/80km
Electrical Interface	Console: RS232, SNMP: RJ45
	Ethernet: RJ45 (4-port)
	Alarm: RS232, Order Wire: RJ11
E1 Interface	Standards: ITU-T G.703, G.704, G.706, G.732
	Ports: 8/16 ports
	Data Rate: 2.048 Mbps ± 50 ppm
	Line Code: HDB3/AMI
	Connector: RJ-45 for 120 ohms, BNC for 75 ohms
T1 Interface	Standards: ITU-T G.703, G.704, AT&T TR-62411, ANSI T1.403
	Ports: 8/16 ports
	Data Rate: 1.544 Mbps ±50 ppm
	Line Code: B8ZS / AMI
	Connector: RJ-45 for 100 ohms
Standards	ITU-T G.703, G.823, G.742, ANSI, AT&T, IEEE 803.2, 802.3u, 802.3ab
Certification	CE, LVD
Indications	Power, Alarm, LBK, RD, LCK, RNG, ACO, Port, Channel
Power Input	90 ~ 240VAC, 18~60VDC
Power Consumption	<25W
Dimensions	438 × 250 × 43mm (W×D×H)
Weight	3.58kg
Temperature	Operating: 0 ~ 60°C, Storage: -10 ~ 70°C
MTBF	50,000 hours