Modularized 16E1/T1 and 4x GbE/FE Managed Fiber Multiplexer FMUX-Phone-4W

Features

1U, 19″ 4-slot chassis
16 E1 (2.048Mb/s) Multiplexer with 100 / 1000Mbps Ethernet and RS-232 data (async) Interface (FMUX1001)
16 E1 (2.048Mb/s) Multiplexer with 10 / 100Mbps Ethernet and RS-232 data (async) Interface (FMUX101)
RS-232 port for system console
One alarm output port, one Order Wire port
4x 10 / 100 / 1000Base-T Ethernet ports (FMUX1001)
4x 10 / 100Base-T Ethernet ports (FMUX101)
SNMP management
LCD plus menu keys for local configuration
Port based VLAN, tag based VLAN & bandwidth control
Telnet and web based remote configuration
2 plug-in SFP slot for optical SFP module
Forward 1024K byte packets on Ethernet port

The 1U, 19″ rack mountable, PDH fiber optic multiplexer transmits up to 16 channels plus a 10 / 100 / 1000Base-T (FMUX1001) / 10 / 100Base-TX (FMUX101) Ethernet channel over a single fiber optic link. The FMUX1001 / FMUX101 chassis supports redundant power and hot swappable design.

The AC supplies operate from 100 ~ 240VAC while DC supplies operate from 18 ~ 60VDC. From the rear of the chassis, one to four hot swappable quad E1 or T1 line cards, serial data communications (V.35, X.21, RS-530) or FXO/FXS voice cards are supported. The standard FMUX1001 configuration may be viewed or set via the front panel LCD/menu keys, serial VT-100 terminal connection, Telnet, web HTTP or SNMP.

Specification

Category	Specification
General	1U, 19” 4-slot chassis
Multiplexer Channels	16 E1 (2.048Mb/s) Multiplexer
Ethernet Ports	4× 10/100/1000Base-T Ethernet ports (FMUX1001) / 4× 10/100Base-T Ethernet ports (FMUX101)
Data Interface	RS-232 data (async) Interface
System Console	RS-232 port for system console
Alarm and Order Wire Ports	One alarm output port, one Order Wire port
Management	SNMP management, LCD with menu keys for local configuration, Telnet, Web-based remote configuration
VLAN & Bandwidth Control	Port-based VLAN, tag-based VLAN, bandwidth control
SFP Slots	2 plug-in SFP slots for optical SFP module
Ethernet Packet Forwarding	Forward 1024K byte packets on Ethernet port
Optical Interface	LC SFP Connector
Data Rate	1.25G (FMUX1001), 155M (FMUX101)
Bit Error Rate	Less than 10-11
Fiber Types	MM 62.2/125μm, 50/125μm, SM 9/125μm
Distance	MM: 2 km, SM: 15/30/50/80/120 km, WDM: 20/40/60/80 km
Wavelength	1310nm, 1550nm
Electrical Interfaces	Console, SNMP RJ45, Ethernet 4× RJ45, Alarm RJ45
Compliance Standards	E1: ITU-T, T1: ITU-T, AT&T, ANSI, Ethernet: IEEE 802.3x
Indications	PWR, Alarm, Phone, ACO, Port, Channels
Power Input	AC module: AC 90 ~ 264V, DC module: DC 18 ~ 72V
Power Output	DC 12V
Power Consumption	< 25W
Dimensions	438 × 250 × 43 mm (W×D×H)
Weight	3.58 kg
Operating Temperature	0 ~ 50°C
Storage Temperature	0 ~ 70°C
Humidity	10 ~ 90% non-condensing
Certifications	CE, FCC
MTBF	50,000 hrs