- Wide frequency range from 1uHz to 80/50MHz
- High 200MSa/s sampling rate
- 16-bit Amplitude Resolution
- Output from any section of 1M-point-long waveform
- 4.3″ high-resolution LCD display/on-screen help/Impedance switch
- Four ways to generate arbitrary waveform: Front Panel Operation
- CSV file uploading, Direct Waveform Reconstruction (DWR), Arbitrary
- Waveform Editing PC Software
- USB, RS-232, GPIB interface support
Series Arbitrary Function Generator AFG-3051
- The AFG-3051 offers up to 50 MHz sine and square wave output with 1 µHz frequency resolution and ±1 ppm accuracy, ensuring high signal fidelity for demanding test environments.
- Equipped with 200 MSa/s sample rate and 16-bit resolution, it allows for complex waveform generation with up to 1 million points and user-defined segments for maximum flexibility.
- Supports AM, FM, PWM, FSK, Sweep, and Burst modes, using both internal and external sources, ideal for simulating real-world signals in research and development tasks.
- Offers voltage ranges up to 10 Vpp (50Ω), low jitter, short rise/fall times, and programmable pulse widths for accurate waveform control and timing precision.
- Features a 4.3” color TFT display, USB, RS232, and GPIB interfaces, with 10 memory slots for setup recall, optimizing workflow in both bench-top and automated systems.
The AFG-3000 Series is arbitrary waveform generator designed for industrial, scientific research and educational applications. The series comes in bandwidths of 80MHz (AFG-3081) and 50MHz (AFG-3051) with built-in multiple standard waveforms to meet users’ diversified needs.
The AFG-3000 Series also provides a high 16-bit resolution, 200MSa/s sample rate and a 1M memory depth for editing arbitrary waveforms directly through the intuitive user interface. The Direct Waveform Reconstruction (DWR) function enables users to directly import waveforms from a GDS-2000 Series oscilloscope to the AFG-3000 via USB host, allowing users to edit waveforms and enhance measurement efficiency.
In addition, the AFG-3000 Series has switchable 50 Ohm and Hi-Z Impedances, built-in On-Screen Help for operation conveniently. Complete parameter settings and waveform can be displayed through 4.3-inch high-resolution TFT LCD. Through USB, RS-232, and GPIB, users can use dedicated PC software or IEEE488.2 commands to edit waveforms.
AFG-3051 & AFG-3081 Specifications
- Waveforms:
- Sine, Square, Ramp, Pulse, Noise, DC, sin(x)/x, Exponential Rise, Exponential Fall, Negative Ramp
- Arbitrary Waveforms:
- ARB Function: Built-in
- Sample Rate: 200 MSa/s
- Repetition Rate: 100 MHz
- Waveform Length: 1M points
- Amplitude Resolution: 16 bits
- Non-Volatile Memory: Ten 1M waveforms
- User-defined Output Section: Any section from 2 to 1M points
- User-defined Mark Output: Any section from 2 to 1M points
- Frequency Characteristics:
- Sine: 80 MHz
- Square: 50 MHz
- Triangle, Ramp: 1 MHz
- Resolution: 1 uHz
- Stability: ±1 ppm (0 to 50°C), ±0.3 ppm (18 to 28°C)
- Accuracy: ±1 ppm, per 1 year
- Tolerance: ≤1 uHz
- Output Characteristics:
- Range: 10 mVpp to 10 Vpp (into 50Ω), 20 mVpp to 20 Vpp (open-circuit)
- Accuracy: ±1% of setting ±1 mVpp (at 1 kHz, >10 mVpp)
- Resolution: 0.1 mV or 4 digits
- Amplitude Flatness: ±1% (0.1dB) <10 MHz, ±2% (0.2 dB) 10 MHz to 50 MHz, ±10% (0.9 dB) 50 MHz to 70 MHz, ±20% (1.9 dB) 70 MHz to 80 MHz (sinewave relative to 1 kHz)
- Units: Vpp, Vrms, dBm
- Offset:
- Range: ±5 Vpk ac+dc (into 50Ω), ±10 Vpk ac+dc (Open circuit)
- Accuracy: 1% of setting + 2 mV + 0.5% of amplitude
- Impedance: 50Ω typical (fixed), >10 MΩ (output disabled)
- Protection: Short-circuit protected; Overload relay automatically disables main output
- SYNC Output:
- Level: TTL-compatible into >1kΩ
- Impedance: 50Ω nominal
- Sinewave Characteristics:
- Harmonic Distortion: -60 dBc (DC~1 MHz, Ampl<3 Vpp), -55 dBc (DC~1 MHz, Ampl>3 Vpp), -45 dBc (1MHz~5 MHz, Ampl>3 Vpp), -30 dBc (5MHz~80 MHz, Ampl>3 Vpp)
- Total Harmonic Distortion: <0.2% + 0.1mVrms (DC to 20 kHz)
- Spurious (non-harmonic): -60 dBc (DC~1 MHz), -50 dBc (1MHz~20MHz), -50 dBc + 6 dBc/octave (1MHz~80MHz)
- Phase Noise: <-65dBc typical (10MHz, 30 kHz band), <-47dBc typical (80MHz, 30 kHz band)
- Square wave Characteristics:
- Rise/Fall Time: <8 nS
- Overshoot: <5%
- Asymmetry: 1% of period + 1 ns
- Variable Duty Cycle: 20.0% to 80.0% (≤25 MHz), 40.0% to 60.0% (25~50MHz), 50.0%(Fixed) (50~80MHz)
- Jitter: 0.01% + 525ps (<2N MHz), 0.1% + 75ps (>2 N MHz)
- Ramp Characteristics:
- Linearity: <0.1% of peak output
- Variable Symmetry: 0% to 100%
- Pulse Characteristics:
- Period: 20ns~2000s
- Pulse Width: 8ns~1999.9s
- Minimum Pulse Width: 8nS (FREQ≤50MHz), 2ns (FREQ >50MHz)
- Resolution: 1nS (FREQ≤50MHz), 1% of setting period (FREQ≤6.5MHz)
- Overshoot: <5%
- Jitter: 100 ppm + 50 ps
- AM Modulation:
- Carrier Waveforms: Sine, Square, Triangle, Ramp, Pulse, Arb
- Modulating Waveforms: Sine, Square, Triangle, Up/Dn Ramp
- Modulating Frequency: 2 mHz to 20 kHz
- Depth: 0% to 120.0%
- Source: Internal/External
- FM Modulation:
- Carrier Waveforms: Sine, Square, Triangle, Ramp
- Modulating Waveforms: Sine, Square, Triangle, Up/Dn Ramp
- Modulating Frequency: 2 mHz to 20 kHz
- Peak Deviation: DC to 80 MHz, DC to 50 MHz
- Source: Internal/External
- PWM:
- Carrier Waveforms: Square
- Modulating Waveforms: Sine, Square, Triangle, Up/Dn Ramp
- Modulating Frequency: 2 mHz to 20 kHz
- Deviation: 0%~100.0% of pulse width
- Source: Internal / External
- FSK
- Carrier Waveforms: Sine, Square, Triangle, Ramp, Pulse
- Modulating Waveforms: 50% duty cycle square
- Internal Rate: 2 mHz to 100 kHz
- Frequency Range: DC to 80 MHz, DC to 50 MHz
- Source: Internal/External
- SWEEP:
- Waveforms: Sine, Square, Triangle, Arb
- Type: Linear or Logarithmic
- Direction: Up or Down
- Start F/Stop FREQ: 100 uHz to 50 MHz, 100 uHz to 80 MHz
- Sweep Time: 1 ms to 500 s
- Trigger: Single, External, Internal
- Marker: Falling edge of Mark signal (Programmable frequency)
- Source: Internal/External
- BURST:
- Waveforms: Sine, Square, Triangle, Ramp
- Frequency: 1 uHz to 50 MHz, 1 uHz to 80 MHz
- Burst Count: 1 to 1000000 cycles or Infinite
- Start/Stop Phase: -360.0 to +360.00
- Internal Period: 1 ms to 500 s
- Gate Source: External Trigger
- Trigger Source: Single, External or Internal Rate
- Trigger Delay: N-Cycle, Infinite: 0s to 85 s
- External Modulation Input:
- Type: for AM, FM, Sweep, PWM
- Voltage Range: 5V full scale
- Input Impedance: 10 kΩ
- Frequency: DC to 20 kHz
- External Trigger Input:
- Type: for FSK, Burst, Sweep
- Input Level: TTL Compatible
- Slope: Rising or falling (selectable)
- Pulse Width: >100 ns
- Input Impedance: 10kΩ, DC coupled
- Latency:
- Sweep: <10 us (typical)
- Burst: <100 ns (typical)
- Jitter:
- Sweep: 2.5 us
- Burst: 1 ns; except pulse, 300 ps
- Modulation Output:
- Type: for AM, FM, Sweep, PWM
- Range: ≥1Vpp
- Amplitude:
- Impedance: >10kΩ typical (fixed)
- Trigger Output:
- Type: for Burst, Sweep
- Level: TTL Compatible into 50Ω
- Pulse Width: >450 ns
- Maximum Rate: 1 MHz
- Fan-out: ≥4 TTL load
- Impedance: 50Ω typical
- Marker Output:
- Type: for ARB, Sweep
- Level: TTL Compatible into 50Ω
- Fan-out: ≥4 TTL load
- Impedance: 50Ω typical
- Store/Recall:
- 10 Groups of Setting Memories
- Interface:
- GPIB, RS232, USB
- Display:
- 4.3 inch TFT LCD
- 480 x 3 (RGB) 272
- System Characteristics:
- Configuration Times Function Change: (typical) Standard—->102ms
- Arb Download Times (typical): See table in source document for Binary and ASCII code download times via GPIB/RS-232, USB (Device), and USB (Host)
- Pulse >660ms, Built-In Arb ->240ms
- Frequency Change: 24ms, Amplitude Change: 50ms, Offset Change: 50ms
- Select User Arb: < 2s for 1M points
- Modulation Change: < 200ms
- General Specifications:
- Power Source: AC100~240V, 50~60Hz
- Power Consumption: 65 VA
- Operating Environment: Temperature: 18~28°C (to satisfy specification), 0~40°C (operating); Relative Humidity: ≤80% (0~40°C), ≤70% (35~40°C)
- Installation category: CAT II
- Operating Altitude: 2000 meters
- Pollution Degree: IEC 61010 Degree 2, Indoor Use
- Storage Temperature: -10~70oC, Humidity: ≤70%
- Dimensions (WxHxD): Bench Top: 265 (W) x 107 (H) x 374 (D)
- Weight: Approx. 4kg
- Safety Designed to: EN61010-1
- EMC Tested to: EN 55011, IEC-61326-1
Accessories:
- GTL-110 x 1
- Instruction Manual x1
- Power cord ×1
Enjoy:
- Nearly 30 Years of Experience
- Reliable Suppliers
- Quality Products
- Free Technical Consultation
- Tailoring Custom Solution
- Expert Technical Support
- No Hidden-Fees
Send Enquiry For:
Series Arbitrary Function Generator AFG-3051
Israel's Leading Businesses Choose DCT
Israel's Leading Businesses Choose DCT
DCT’s Skilled Management Team has more than twenty-five years of experience and expertise in the local business environment, coupled with a highly motivated group of employees, positions us as the preferred supplier among the major customers in the industry.
DCT Competitive Edge is the prompt response to our customer needs, the online and on-site direct technical support, professional consulting for the best cost/performance solution, on-time delivery, long-term maintenance, and support.
Still Conflicted? Let's Talk.
We can get back to you!