LCR Meter/Impedance Analyzer 6630 Series

Automatic Production Line

Connect 6630 RS-232, LAN, GPIB or Handler to automatic machine (measuring speed<3mS)，automated production is the most efficiency.

The precision impedance analyzer 6632 has seven frequency options(10Hz to 1/3/5/10/20/30/50MHz).

List Mode

50 groups of list mode setting (Each group contains up to 15 steps).

Four Parameters Displayed Simultaneously
7.0”TFT, 800×480 color screen, and four parameters can displayed simultaneously.

Measure Inductor (DCR)

Inductor coil turns and winding materials will affect DCR value. The key parameters for inductor are Ls / Lp / Q / SRF / DCR.

Magnetic Material Test Fixture (FX-0000C8)

Using the magnetic material test fixture for measuring of permeability of various toroidal cores or ferrite cores and electromagnetic shielding coating materials, 6630 built-in formula to directly calculate the permeability coefficient value μr

Dielectric Material Test Fixture (FX-0000C7)
Liquid Dielectric Material Test Fixture (FX-000C20)

Using the dielectric material test fixture for measuring PCB board or ceramic board.

6630 built-in formula to directly calculate the material dielectric value εr ‘/εr “

Using the liquid dielectric material test fixture for measuring the characteristics of electrochemical materials.

MICROTEST 6630 LCR Tester provides a wide frequency range of 10Hz to 50MHz for measuring the impedance characteristics of components and materials. The measured parameters include |Z| (impedance), |Y| (admittance), θ (phase angle), X (reactance), R (series/parallel resistance), G (conductance), B (susceptance), L (inductance), D (dissipation factor), Q (quality factor), DCR (DC resistance), C (capacitance), ESR (equivalent series resistance), ε (relative permittivity), and μr (relative permeability). With a measurement speed of up to 3mS, it is an excellent choice for automated inductor testing. It supports LAN/USB Host/USB Device/GPIB/RS-232 communication interfaces, making it compatible with automation equipment or human-machine interfaces (PLC).

SPEC

Model	6630
Frequency Range	10Hz-50MHz
Frequency Setting	Continuity
Frequency Resolution	±0.01%
Frequency Output Accuracy	100mHz, 6-bit Frequency Input
Basic Accuracy	typical ±0.05%
AC Drive Level	Test Signal Voltage Level	10mV – 2Vrms(100Ω) 10mV – 1Vrms(25Ω)
	Voltage Minimum Resolution	1mV
	Accuracy	ALC ON：6％ * Voltage ±2mV ALC OFF：10％ * Voltage ±2mV
	Test Signal Current Level	200µA – 20mArms
	Current Minimum Resolution	10µA
	Accuracy	ALC ON：6％ * Current ± 20µA ALC OFF：10％ * Current ± 20µA
DC Drive Level	1V (fixed)
Output Impedance	25Ω/100Ω (switchable)
Measurement Mode	Meter mode, list mode
Measurement Parameters	\|Z\|、\|Y\|、θ、X、R、G、B、L、D、Q、DCR、C、ε and μr
Test Time (Fastest)	< 3mS

Measurement Parameters

Parameters	Range
\|Z\|	0.000 mΩ to 9999.99 MΩ
R, X	± 0.000 mΩ to 9999.99 MΩ
\|Y\|	0.00000 μS to 999.999 kS
G, B	± 0.00000 μS to 999.999 kS
θRAD	± 0.00000 to 3.14159
θDEG	± 0.000° to 180.000°
Cs, Cp	± 0.00000 pF to 9999.99 F
Ls, Lp	± 0.00 nH to 9999.99 kH
D	0.00000 to 9999.99
Q	0.00 to 9999.99
Δ	± 0.00% to 9999.99%
Rdc	0.00 mΩ to 99.9999 MΩ
εr’ εr”	0 to 100000
μr’ μr”	0 to 100000

System

Measurement Circuit	Series/Parallel
Correction	Open Circuit/Short Circuit/Load correction
Cable Compensation	0 / 0.5 / 1 /2 (m)
BIN	ABS、ΔABS、Δ%、OFF
Comparator	9
List Mode	50 groups of Multi-steps setting (Each group contains up to 15 steps)
Bulit-in Storge	100 sets LCR setting documents, 50 groups of list mode setting
USB Host Storge	LCR setting documents, list mode setting document, BMP graphics, Sweep screen and test result data
Trigger Test	Auto, manual, RS-232, GPIB, Handler
Power Supply	Voltage：90-264Vac
Power Supply	Frequency：47-63Hz
Power consumption	30VA
Environment	Temperature：10℃-40℃
Environment	Humidity：20-90%RH
Dimension	336x147x340 mm (WHD)
Weight	3 Kg
Interface	RS-232、Handler、LAN、USB Host、USB Device
Display	Color Screen, 7″ TFT (800*480)

Standard Accessories

Power Cord
DIP Test Fixture (FX-000C19)

MLCC｜Option

For MLCC (Class 2) -Automatic Level Compensation Fixture

Automatic Level Compensation Fixture

(FX-LR0001)

SMD Component Testing Fixture

(FX-000C12)

Optional Accessories

PC Link Software
DIP Test Fixture (F423503)
DIP Test Fixture (F423504)
SMD Test Fixture (F423905)
Kelvin Clip Leads (F423906A)
Bottom Electrode SMD Test Fixture (FX-000C10)
SMD Tweezer Test Leads (FX-000C11)
SMD Test Fixture (FX-000C12)
Dielectric Material Test Fixture (FX-0000C7)
Liquid Dielectric Material Test Fixture (FX-000C20)
Magnetic Material Test Fixture (FX-0000C8)
Material Testing Fixture (FX-0000C9)
External Voltage Bias (F420001)
External Voltage Bias (F420003)
External Voltage Bias (F420006)
BNC Test Leads (F663001 A/B/C)