- 500 MSa/s sampling rate and 250 MHz analog bandwidth (model 540)
- High resolution 14-bit and 16-bit signal acquisition
- Deep memory: up to 64 Million samples per channel (with XM option)
- Built-in 40 MHz, 14-bit Arbitrary Waveform Generator
- WiFi, LAN (1 Gbit), and USB 3.0 connectivity
- Fully battery-powered for hours of isolated measurements
- SureConnectâ„¢ real-time probe contact verification (option S)
- Resistance measurement (Ohm scope function, option S)
- 1 ppm high-precision timebase for accurate frequency and timing measurements
- Spectrum analyzer with up to 32 million frequency bins
- Protocol analyzers for CAN, I²C, and other serial communications
- High-performance 16-bit digital multimeter (DMM) functionality
- CMI interface for synchronized multi-instrument measurements
- Rugged design with protective rubber bumpers
- Free software and firmware updates
WiFi Oscilloscopes Series WiFiScope WS5-530XM
- The WS5-530XM offers a 250 MHz bandwidth and 500 MSa/s sampling rate, ensuring precise and high-speed signal analysis for a wide variety of applications.
- Equipped with digital triggering modes such as edge, window, and pulse width, the oscilloscope allows for accurate signal capture and isolation of specific events, even in complex scenarios.
- The oscilloscope features a built-in arbitrary waveform generator with frequencies up to 40 MHz, capable of generating sine, square, triangle, and pulse waveforms for both testing and simulation.
- With extended memory options and segmented triggering, the WS5-530XM allows for long-duration signal captures and efficient data analysis, making it ideal for continuous monitoring.
- Supports synchronization across multiple devices via CMI and offers USB, LAN, and Wi-Fi connectivity, ensuring easy integration into various testing environments.
Step into the future of signal analysis with the WiFiScope WS5 series — the world’s best 500 MHz, high-resolution WiFi oscilloscope with a built-in 40 MHz Arbitrary Waveform Generator. Combining the power of 14- and 16-bit resolution, the WS5 series delivers 256 times more detail than traditional 8-bit oscilloscopes, capturing even the finest nuances of your signals with breathtaking clarity. With super-deep memory of up to 64 million samples per channel, the WiFiScope WS5 ensures that no event goes unnoticed, even during extreme zooming or long-duration recordings.
Built for true portability, the WS5 operates fully wirelessly over WiFi, or connects through Gigabit LAN and USB 3.0 for maximum flexibility. Battery-powered for hours of isolated operation, it enables safe, floating measurements even in challenging environments. The device’s ultra-precise 1 ppm timebase guarantees rock-solid frequency and timing accuracy, outperforming conventional instruments many times over.
The WiFiScope WS5 is more than just an oscilloscope. It includes a powerful, low-distortion function generator capable of producing high-fidelity signals up to 40 MHz, a full-featured 16-bit digital multimeter, a deep-spectrum analyzer with 32 million frequency bins, and a versatile protocol analyzer for decoding serial communications. With innovative technologies like SureConnect real-time probe connection verification, CMI multi-instrument synchronization, and resistance measurement directly through the oscilloscope channels, the WS5 pushes the limits of what portable measurement devices can achieve.
Compact, rugged, and ready for the demands of modern electronics, the WiFiScope WS5 captures and analyzes signals faster, deeper, and more accurately than any other oscilloscope in its class. Whether you are troubleshooting complex systems, designing advanced electronics, or teaching tomorrow’s engineers, the WiFiScope WS5 delivers professional-grade performance without compromise.
Acquisition System
- Input Channels: 2 analog (BNC, single-ended)
- Resolution: 8, 12, 14, 16-bit (user-selectable)
- Bandwidth: 250 MHz per channel
- Noise:
- 300 µVrms (200 mV range, 12-bit, 50 MSa/s)
- 85 µVrms (200 mV range, 16-bit, 6.25 MSa/s)
- Maximum Voltage:
- 200 V (DC + AC peak < 10 kHz)
- 600 V (1:10 probe)
- Coupling: AC/DC
- Sampling Rate:
- Up to 500 MSa/s (1 channel)
- 200 MSa/s (2 channels)
- 100 MSa/s (14-bit), 6.25 MSa/s (16-bit)
- Memory:
- 256 KSamples (1 channel)
- 128 KSamples (2 channels)
- Accuracy: DC accuracy of 0.25% (0.1% typical)
Trigger System
- Trigger Modes:
- Rising, Falling, Any edge
- Inside/Outside window, Enter/Exit window, Pulse width
- Trigger Sources:
- CH1, CH2, OR, External, Generator start, Generator new period, Generator stop
- Level Adjustment: 0 to 100% of full scale
- Hysteresis Adjustment: 0 to 100% of full scale
- Pre/Post Trigger: 0 to selected record length
- Segmented Trigger: Available on extended memory option
- Maximum Segments: 1024
Function Generator
- Waveforms: Sine, Square, Triangle, Pulse, Noise, DC
- Frequency Range:
- WS5-540: 1 µHz to 40 MHz
- WS5-530: 1 µHz to 30 MHz
- WS5-220: 1 µHz to 20 MHz
- Amplitude:
- Up to 24 Vpp at ≤ 10 MHz
- 22 Vpp at ≤ 20 MHz
- 18 Vpp at ≤ 30 MHz
- 15 Vpp at ≤ 40 MHz
- Rise/Fall Time: < 8 ns
- Jitter (RMS): < 50 ps
- Nonlinearity: < 0.01% of peak output
Multi-Instrument Synchronization
- Method: Via CMI (USB-connected instruments)
- Synchronization Accuracy: 0 ppm
- Maximum Instruments: Limited by available USB ports
- CMI Interface: 2x, CMI 1, CMI 2
Power Requirements
- Power Source: USB, external input, or built-in battery
- Battery: Li-ion, 7000 mAh, 3.7 V
- Consumption: 12 VDC, 2 A max
- External Power: From power adapter
Physical & I/O Connectors
- Dimensions:
- Height: 44 mm (1.7 inch)
- Length: 187 mm (7.4 inch)
- Width: 215 mm (8.5 inch)
- Weight: 751 g (26.5 oz)
- USB Cord Length: 1.5 m (59 inch)
- Connectors:
- Channel 1 & 2: BNC, female
- USB: USB 3 type B
- LAN: RJ45 socket
- Extension: D-sub 9 pins female
- Power: 3.5 mm power socket
- CMI connectors: 2x HDMI type C
System Requirements
- PC I/O Connection: USB 1.1, USB 2.0, RJ45, WiFi
- Operating System: Windows 10/11 (64-bit), Linux (via libtiepie-hw SDK)
Environmental Conditions
- Operating Temperature: 15°C to 30°C (rated accuracy), 10°C to 35°C (without specifications)
- Relative Humidity: 10% to 90%, non-condensing
Certifications & Compliances
- CE Mark Compliance: Yes
- RoHS Compliant: Yes
- EN 55011:2009/A1:2010: Yes
Customer Service
- Warranty: 2 years (excluding probes, measure leads, batteries)
- Warranty on Batteries: 6 months
- Return Shipping: No charge for return shipping
- Long-Term Support: 7 years
- Software Upgrades: Free
- Optional Warranty Extension: Up to 5 years
Included Items
-
Carry Case: Carry case BB452
-
Instrument: WiFiScope WS5
-
Probes:
-
2x Oscilloscope Probe 1:1-1:10 (HP-3250I)
-
-
Accessories:
-
Handyscope / WiFiScope power supply
-
USB 3 cable (1.5 m long)
-
Network cable (3 m long)
-
-
Software:
-
For Windows 10/11 (64-bit), available via website
-
-
Drivers:
-
For Windows 10/11 (64-bit), available via website
-
-
Software Development Kit (SDK):
-
For Windows 10/11 (64-bit) and Linux, available via website
-
-
Manuals:
-
Instrument manual and software user’s manuals (printed and digital, available via website)
-
Enjoy:
- Nearly 30 Years of Experience
- Reliable Suppliers
- Quality Products
- Free Technical Consultation
- Tailoring Custom Solution
- Expert Technical Support
- No Hidden-Fees
Send Enquiry For:
WiFi Oscilloscopes Series WiFiScope WS5-530XM
Israel's Leading Businesses Choose DCT
Israel's Leading Businesses Choose DCT
DCT’s Skilled Management Team has more than twenty-five years of experience and expertise in the local business environment, coupled with a highly motivated group of employees, positions us as the preferred supplier among the major customers in the industry.
DCT Competitive Edge is the prompt response to our customer needs, the online and on-site direct technical support, professional consulting for the best cost/performance solution, on-time delivery, long-term maintenance, and support.
Still Conflicted? Let's Talk.
We can get back to you!