Probe compensation cable TP-DB9-BNC-30

Features

Provides easy access to the 1 kHz, -1 V to 1 V square wave compensation signal for oscilloscope probes.
Compatible with Handyscope HS6 DIFF, Handyscope HS6, WiFiScope WS6 DIFF, and WiFiScope WS6.
30 cm (19.7 inch) cable length for convenient reach and flexible usage.
9-pin male D-sub connector on the instrument side and female BNC connector on the probe side.
Essential for compensating attenuating oscilloscope probes such as the Oscilloscope Probe 1:1-1:10 – HP-3250I.
RoHS compliant, ensuring environmental safety standards.
Weighs only 35 g, making it lightweight and easy to handle.

When you want to use attenuating oscilloscope probes like the Oscilloscope Probe 1:1-1:10 – HP-3250I, the probes require a frequency compensation to match them with the input channels. For that purpose, the scopes have a dedicated output on their extension connector, that produces a 1 kHz, -1 V to 1 V square wave signal. The Probe compensation cable TP-DB9-BNC-30 gives an easy access to that signal.

To connect the probe to the probe calibration signal at the extension connector of the instrument, remove the sprung hook from the probe and connect the BNC adapter that is delivered with the probe. Connect the Probe compensation cable TP-DB9-BNC-30 to the extension connector of the scope and the probe with BNC adapter to the BNC connector of the Probe compensation cable TP-DB9-BNC-30 . Make sure to set the probe to its x10 setting and follow the probe compensation procedure.

When your have a Handyscope HS6 DIFF or WiFiScope WS6 DIFF, it requires option SafeGround to be installed and enabled to use attenuating oscilloscope probes.

Specifications

Specification	Details
Cable Length	30 cm (19.7 inch)
Instrument Side Connector	9 pin male D-sub
Probe Side Connector	Female BNC
Signal Connection	Pin 3: Center pin
Ground Connection	Pin 6: Outer shell
Weight	35 g
RoHS Compliant	Yes
Compatible Instruments	Handyscope HS6 DIFF, Handyscope HS6, WiFiScope WS6 DIFF, WiFiScope WS6