DCT | Test and Measurement

Welcome to our new site! Feel free to report any issues, contact us at [email protected]

10GbE SM Fibre Kit 1550nm ER

10GbE SM Fibre Kit 1550nm ER

  • Complete singlemode kit including a 1550nm 10GBASE-ER SFP+ transceiver, durable duplex patch cords and SC-SC adapter for rapid deployment.

  • Designed for long-reach 10GbE links in data center interconnects, metro and carrier networks where extended optical budget is required.

  • Plug-and-play SFP+ form-factor fits standard 10G ports and media converters for straightforward integration with network gear and test instruments.

  • Robust patch cords and SC-SC adapter minimise insertion loss; performance depends on SMF quality and link budget for maximum reach.

  • Note: two kits are required (one per link end) to perform full bidirectional testing and link validation.

Send Enquiry

Key Features

  • 10GBASE-ER SFP+ transceiver (1550 nm)

  • Singlemode fiber support (SMF, ITU-T G.652/G.655 dependent)

  • Extended reach for long-haul links (typical tens of kilometres, link-budget dependent)

  • Duplex SC connector compatibility (SC-SC adapter included)

  • Plug-and-play SFP+ form factor for standard 10G ports

  • Includes high-quality duplex singlemode patch cords (length as specified)

  • Low insertion loss and stable optical performance

  • Ideal for commissioning, BER checks, loss measurement and continuity tests

  • Requires two kits for full bidirectional verification

The 10GbE SM Fibre Kit 1550nm ER is a precision singlemode optical solution engineered for long-reach 10 Gigabit Ethernet links. Each kit includes a 1550nm 10GBASE-ER SFP+ transceiver, high-quality singlemode fiber patch cords and an SC-SC adapter so installers and testers can quickly terminate, connect and validate long-haul optical links. Designed for data center interconnects, metro rings and carrier backbones, the kit provides a plug-and-play SFP+ module that fits standard 10G ports for seamless integration with switches, test instruments and media converters.

For full bidirectional verification you’ll need two kits (one at each end). The 1550nm ER class transceiver offers enhanced optical budget and extended reach—typically supporting tens of kilometres on standard SMF depending on fiber type and link budget—while robust patch cords and adapters minimise insertion loss. The kit is ideal for commissioning, troubleshooting and short-to-long distance deployments where reliable end-to-end optical performance is required, and it pairs well with test instruments that measure loss, continuity and BER.

Specifications
Specification Detail
Model 10GbE SM Fibre Kit 1550nm ER
Transceiver 10GBASE-ER SFP+ (1550 nm)
Fiber type Singlemode Fiber (SMF, G.652 / G.655 dependent)
Connector Duplex SC (SC-SC adapter included)
Data rate 10 Gbps
Typical reach Extended (tens of kilometres; up to ~40 km typical on standard SMF—link budget dependent)
Included components 1 × 1550nm 10GBASE-ER SFP+, duplex singlemode patch cords, 1 × SC-SC adapter
Operating temperature Commercial/Industrial ranges available—consult product variant (typically 0°C to +70°C)
Power Powered by SFP+ host slot (compliant with SFF-8431/SFF-8432)
Form factor SFP+ (hot-pluggable)
Compliance 10GBASE-ER optical specifications; check datasheet for vendor firmware and host compatibility
Notes Two kits required for bidirectional testing; actual reach and performance depend on fiber type, splices, connectors and link budget
Relevant Accessories
Accessory Purpose Notes
Second 10GbE SM Fibre Kit Required at remote end for bidirectional testing One kit per link end for full verification
Protective Dust Caps Protect SFP+ and fiber connectors from contamination Essential for maintaining low insertion loss
Inline Optical Attenuators Adjust optical power for testing or matching link budget Fixed or variable types available
LC/SC Patch Panels & Adapters Panel termination and connector conversion Use where different connector types are present
Optical Power Meter & Light Source Measure insertion loss and verify optical power Recommended for acceptance testing
Fiber Inspection Microscope Inspect end-face cleanliness and damage Improves test accuracy and prevents repeat failures
Protective Carry Pouch or Hard Case Store and transport SFP+ modules and patch cords Shock and dust protection recommended

Enjoy:

Send Enquiry For:

10GbE SM Fibre Kit 1550nm ER

Israel's Leading Businesses Choose DCT

Israel's Leading Businesses Choose DCT

DCT’s Skilled Management Team has more than twenty-five years of experience and expertise in the local business environment, coupled with a highly motivated group of employees, positions us as the preferred supplier among the major customers in the industry.

DCT Competitive Edge is the prompt response to our customer needs, the online and on-site direct technical support, professional consulting for the best cost/performance solution, on-time delivery, long-term maintenance, and support.

We can get back to you!

Need a Rugged Device?

Fill in the form!

A variety of tablets are available for all use cases.
- only solutions - No obligations -

Our experts can help you find just about anything.

What Were You Looking For? Let us help.