Series Multi-Channel Function Generator MFG-2260MRA

Maximum Five Output Channels
– 2 Equivalent Performance Arbitrary Channels Frequency : 1μHz~10/20/30/60/200MHz
– RF Channel Frequency (FG/ARB/MOD) : 160/320MHz
– Pulse Generator Frequency : 25MHz
– Power Amplifier : Low Frequency, 100kHz, Output 20W
True Point by Point Output Arbitrary Waveform Function: MFG-2220HM Sample Rate: 250MSa/s, Repetition Rate: 125MHz; Other models Sample Rate: 200MSa/s, Repetition Rate: 100MHz, 14-bit Resolution, 16k Points Memory Depth
Earth Ground Isolation Design Among I/O Terminals and Instrument Chassis (MFG-2220HM Excluded)
Frequency Counter : 150MHz, 8 bits Frequency Resolution
AM/FM/PM/ASK/FSK/PSK/SUM/PWM Modulation
Built-in Medical and Automotive Electronic Waveforms(MFG-2220HM Excluded)
USB Host/USB Device/LAN (MFG-22XX only)

The MFG-2000 series is multi-channel function generator, including MFG-21XX entry-level models and MFG-22XX advanced models. The output channels of MFG-21XX models include one single-channel 10M/20M/30M/60MHz ARB generator ; one 25MHz pulse generator ; one 160MHz or 320MHz RF signal generator (MFG-2160MF/MFG-2160MR) and one power amplifier (MFG-2120MA only)；MFG-22XX models include one 30MHz/60/200MHz dual performance ARB generator; one 25MHzpulse generator; one 160MHz or 320MHz RF signal generator (MFG-2260MFA/MFG-2260MRA) ; and one power amplifier (MFG-2260MFA/MFG-2260MRA only).

MFG-2000 series, which has up to 5 simultaneous output channels (MFG-2260MFA/MFG-2260MRA), including CH1 and CH2 equivalent performance dual channel arbitrary function generator with the maximum 60MHz for both channels; RF signal generator, a standard AFG, which produces the maximum 320MHz sine wave and various modulation RF signals; pulse generator, whose frequency reaches 25MHz; power amplifier, which is ideal for audio range. The above-mentioned five different functionality channels are separately or totally allocated on 10 models, which extend from the basic single-channel AFG with pulse generator models to five-channel models so as to satisfy various educational and industrial applications.

The AFG channel of the MFG-2000 series outputs sine, square, and triangle, etc. The series features true point-by-point output arbitrary waveform characteristics of 200 MHz sample rate, 100MHz waveform repetition rate, 14-bit resolution, and 16k point memory depth. Some models provide various modulation methods such as AM/FM/PM/FSK/PWM, Sweep, Burst, Trigger, 150MHz Frequency Counter. Synchronized dual channel models provide correlated functions, including synchronization, delay, sum, and coupling. RF signal generator, a complete AFG signal source (including ARB), features various modulations, Sweep, and digital modulations such as ASK and PSK and its sine wave frequency is up to 320MHz. A full-function pulse generator with 25 MHz is equipped to all models and its pulse width, rise edge time, fall edge time are adjustable that can be applied as trigger signals. Independent input/output power amplifier with 20W, 10dB, DC-100KHz bandwidth, and distortion less than 0.1% can be applied to the audio application.

MFG-2000 Series Specifications

MFG-2000 Series Specific Functions:
- CH1 Function with ARB:
  - MFG-2110: 10MHz
  - MFG-2120: 20MHz
  - MFG-2120MA: 20MHz
  - MFG-2130M: 30MHz
  - MFG-2160MF: 60MHz
  - MFG-2160MR: 60MHz
  - MFG-2230M: 30MHz
  - MFG-2260M: 60MHz
  - MFG-2260MFA: 60MHz
  - MFG-2260MRA: 60MHz
- CH2 Function with ARB:
  - MFG-2230M: 30MHz
  - MFG-2260M: 60MHz
  - MFG-2260MFA: 60MHz
  - MFG-2260MRA: 60MHz
- 25MHz Pulse Generator:
  - MFG-2110
  - MFG-2230M
- RF Generator (Function with ARB):
  - MFG-2160MF: 160MHz
  - MFG-2160MR: 320MHz
  - MFG-2260MFA: 160MHz
  - MFG-2260MRA: 320MHz
- Power Amplifier
  - MFG-2160MF
  - MFG-2230M
- Modulation/Sweep/Burst/Frequency Counter
  - MFG-2160MF
  - MFG-2230M

CH1/CH2 Arbitrary Functions:
- ARB Function: Built-in
- Sample Rate: 200 MSa/s
- Repetition Rate: 100MHz
- Waveform Length: 16k points
- Amplitude Resolution: 14 bits
- Non-Volatile Memory: 10 sets of 16k points
- User-defined output section: From point 2 to 16384
- User-defined output marker section: From point 2 to 16384
- Output mode: 1 to 1,000,000 cycles or infinite mode

Frequency Characteristics:
- Range:
  - Sine: 60MHz (max)
  - Square: 25MHz (max)
  - Triangle, Ramp: 1MHz
  - RF Generator
    - MFG-2XXXMF: 1uHz~160MHz
    - MFG-2XXXMR: 1uHz~320MHz
- Resolution: 1μHz
- Accuracy: ±20 ppm
- Stability: ±1 ppm, per 1 year
- Aging Tolerance: ≤1μHz

Output Characteristics:
- Amplitude Range:
  - 1mVpp to 10 Vpp (into 50Ω)
  - 2mVpp to 20 Vpp (open-circuit)
  - RF Generator (into 50Ω)
    - MFG-2XXXMF: 1mVpp to 2 Vpp
    - MFG-2XXXMR: 1mVpp to 1 Vpp
- Accuracy: ±2% of setting ±1 mVpp (at 1 kHz/into 50Ω without DC offset)
- Resolution: 0.1mV or 4 digits
- Flatness: (Sine wave relative to 1 kHz/into 50Ω)
  - ±1% (0.1dB) ≤1MHz
  - ±3% (0.3dB) ≤50 MHz
  - ±6% (1.5dB) ≤60MHz
  - RF Generator
    - ±1% (0.1dB) ≤1MHz
    - ±3% (0.3dB) ≤50 MHz
    - ±10% (0.9dB) ≤160MHz
    - ±35% (3.5dB) ≤320MHz
- Units: Vpp, Vrms, dBm
- Offset:
  - Range: ±5 Vpk AC+DC (into 50Ω), ±10 Vpk AC+DC (Open circuit)
  - Accuracy: ±(1% of setting + 5mV+ 0.5% of amplitude)
- Waveform Output Impedance: 50Ω typical (fixed); > 10MΩ (output disabled)
- Protection: Short-circuit protected; Overload relay automatically disables main output

Sync Output:
- Ground Isolation: 42Vpk max
- Range: TTL-compatible into >1kΩ
- Impedance: 50Ω standard

Sine Wave Characteristics:
- Harmonic Distortion:
  - DC~200kHz, Ampl>0.1 Vpp: -60 dBc
  - 200kHz~1 MHz, Ampl>0.1Vpp: -55 dBc
  - 1MHz~10 MHz, Ampl>0.1Vpp: -45 dBc
  - 10MHz~30MHz, Ampl>0.1Vpp: -35 dBc
  - 30MHz~60MHz, Ampl>0.1Vpp: -27 dBc
- Total Harmonic Distortion: <0.1% (Ampl>1Vpp) DC~100 kHz

Square Wave Characteristics:
- Rise/Fall Time: <15ns
- Overshoot: <5%
- Asymmetry: 1% of period + 5 ns
- Variable Duty Cycle: 0.01% to 99.99% (limited by the current frequency setting)
- Jitter: 20ppm+500ps

Ramp Characteristics:
- Linearity: <0.1% of peak output
- Variable Symmetry: 0% to 100%

Pulse Characteristics:
- Frequency: 1uHz~25MHz
- Pulse Width: 20nS (limited by the current frequency setting)
- Variable Duty Cycle: 0.01%~99.99% (limited by the current frequency setting)
- Overshoot: <5%
- Jitter: 20ppm+500ps

Generator (Pulse):
- Amplitude: 1mVpp to 2.5 Vpp (into 50Ω), 2mVpp to 5 Vpp (open-circuit)
- Offset: ±1 Vpk ac +dc (into 50Ω), ±2Vpk ac +dc (Open circuit)
- Frequency: 1uHz~25MHz
- Pulse Width: 20ns ~ 999.7ks (limited by the current frequency setting)
- Variable Duty Cycle: 0.1%~99.9% (limited by the current frequency setting)
- Leading and Trailing Edge Time: 10ns ~ 20s (1ns resolution) (limited by the current frequency and pulse width settings)
- Overshoot: <5%
- Jitter: 100ppm +500ps

RF Generator:
- Jitter: 20ppm + 5ns
- Frequency Characteristics:
  - Range: 1uHz~160MHz(MFG-2XXXMF), 1uHz~320MHz(MFG-2XXXMR)
  - Square: 25MHz(max)
  - Triangle, Ramp: 1MHz
- Resolution: 1μHz
- Accuracy: ±20 ppm
- Stability: ±1 ppm, per 1 year
- Tolerance: ≤1μHz
- Output Characteristics:
  - Amplitude (into 50Ω): 1mVpp to 2 Vpp (MFG-2XXXMF), 1mVpp to 1 Vpp (MFG-2XXXMR)
  - Accuracy: ±2% of setting ±1 mVpp (at 1 kHz/into 50Ω without DC offset))
  - Resolution: 1mV or 3 digits
  - Flatness: (sine wave relative to 1 kHz/into 50Ω)
    - ±1% (0.1dB) ≤1MHz
    - ±3% (0.3dB) ≤50 MHz
    - ±10% (0.9dB) ≤160MHz
    - ±35% (3.5dB) ≤320MHz
  - Offset: +1 Vpk AC+DC (into 50Ω), +2Vpk AC+DC (Open circuit)
  - Waveform Output Impedance: 50Ω typical (fixed), > 10MΩ (output disabled)
- Sine wave Characteristics:
  - Harmonic Distortion:
    - DC~200kHz, Ampl>0.1 Vpp: -60 dBc
    - 200kHz~1 MHz, Ampl>0.1 Vpp: -55 dBc
    - 1MHz~10 MHz, Ampl>0.1Vpp -45 dBc
    - 10MHz~320MHz, Ampl>0.1Vpp: -30 dBc
  - Total harmonic distortion: <0.1% (Ampl>1Vpp) DC~100 kHz
- Square wave Characteristics
  - Rise/Fall Time: <15ns
  - Overshoot: <5%
  - Asymmetry: 1% of period +5 ns
  - Variable duty Cycle: 0.01% to 99.99% (limited by the current frequency setting)
  - Jitter: 20ppm+500ps
- Ramp Characteristics
  - Linearity: <0.1% of peak output
  - Variable Symmetry: 0% to 100%

Modulation/Sweep:
- Modulation Type: AM, FM, PM, FSK, PWM (The detail same as CH1 modulation specification)
- Sweep type: Frequency
- Source: INT/EXT (INT only for AM, FM, PM, PWM)
- Modulating Frequency:
  - Sine-DDS 5us~327.68ms (Resolution:5us)
  - Sine-ARB 2mHz to 20kHz(Resolution:1mHz)
- PSK:
  - Carrier Waveforms: Sine-DDS
  - Modulating Waveforms: 50% duty cycle square
  - Internal Frequency: 2 mHz to 1 MHz
  - Phase Range: 0°~360.0°
- ASK
  - Carrier Waveforms: Sine-DDS
  - Modulating Waveforms: 50% duty cycle square
  - Internal Frequency: 2 mHz to 1 MHz
  - Amplitude Range: 0%~100.0%
  - Source: Internal/External
- Amplifier
  - Input Impedance: 10KΩ
  - Input voltage: 1.25Vpk max.
  - Working Mode: Constant Voltage
  - Gain: 20dB
  - Output Power (RL=8Ω): 20W(Square)
  - Output Voltage: 12.5Vpk max.
  - Output Current: 1.6Amax
  - Rise/Fall Time: <2.5uS
  - Full Power Bandwidth: DC-100KHz
  - Overshoot: 5%
  - Total harmonic distortion: <0.1% (Ampl>1Vpp) 20Hz~20 kHz
  - Functions: Ground Isolation 42Vpk max
- AM Modulation
  - Carrier Waveforms: Sine, Square, Triangle, Ramp, Pulse, Arb
  - Modulating Waveforms: Sine, Square, Triangle, Upramp, Dnramp
  - Modulating Frequency: 2mHz to 20kHz (Int) DC to 20kHz (Ext)
  - Depth: 0% to 120.0%
  - Source: Internal/External
- FM Modulation
  - Carrier Waveforms: Sine, Square, Triangle, Ramp
  - Modulating Waveforms: Sine, Square, Triangle, Upramp, Dnramp
  - Modulating Frequency: 2mHz to 20kHz (Int) DC to 20kHz (Ext)
  - Peak Deviation: DC to max frequency
  - Source: Internal/External
- PM
  - Carrier Waveforms: Sine, Square, Triangle, Ramp
  - Modulating Waveforms: Sine, Square, Triangle, Upramp, Dnramp
  - Modulation Frequency: 2mHz to 20kHz (Int) DC to 20kHz (Ext)
  - Phase deviation: 0°~360.0°
  - Source: Internal/External
- SUM
  - Carrier Waveforms: Sine, Square, Triangle, Ramp
  - Modulating Waveforms: Sine, Square, Triangle, Upramp, Dnramp
  - Modulation Frequency: 2mHz to 20kHz (Int) DC to 20kHz (Ext)
  - SUM depth: 0%~100.0%
  - Source: Internal/External
- PWM
  - Carrier Waveforms: Sine, Square, Triangle, Ramp
  - Modulating Waveforms: Sine, Square, Triangle, Upramp, Dnramp
  - Modulation Frequency: 2mHz to 20kHz (Int) DC to 20kHz (Ext)
  - Phase deviation: 0%~100.0% pulse width
  - Source: Internal/External
- FSK
  - Carrier Waveforms: Sine, Square, Triangle, Ramp, Pulse
  - Modulating Waveforms: 50% duty cycle square
  - Internal Frequency: 2 mHz to 1 MHz
  - Frequency Range: 1µHz to max frequency
  - Source: Internal/External
- Sweep
  - Waveforms: Sine, Square, Triangle, Ramp
  - Type: Linear or Logarithmic
  - Sweep direction: Sweep up or sweep down
  - Start/Stop Freq: 1uHz to max frequency
  - Time: 1ms to 500s
  - Source: Internal/External
  - Trigger: Single, External, Internal.
  - Marker: Marker signal on falling edge (programmable)
  - Source: Internal/External
- Burst
  - Waveforms: Sine, Square, Triangle, Ramp
  - Frequency: Max Frequency 25MHz (Sine, Square); 1MHz(Triangle, Ramp)
  - Pulse count: 1~1000000 Cycles or infinite
  - Start/Stop Phase: -360.0°~+360.0°
  - Internal Frequency: 1 us~500 s
  - Gate source: External Trigger
  - Trigger Source: Single, External, Internal.
  - Trigger Delay: NCycle, Infinite 0s~100 s

Trigger Input:
- Type: For FSK, Burst, Sweep
- Input Level: TTL Compatibility
- Slope: Rising or Falling(Selectable)
- Pulse Width: >100ns
- Input Impedance: 10KΩ DC coupled

Modulation Input:
- Type: For AM, FM, PM, SUM, PWM
- Voltage Range: ±5V full scale
- Input Impedance: 10KΩ
- Frequency: DC to 20kHz
- Ground Isolation: 42Vpk max

Trigger Output
- Type: For ARB, Burst, Sweep
- Level: TTL Compatible into 50Ω
- Pulse Width: >16ns
- Maximum Rate: 25MHz
- Fan-out: 24 TTL Load
- Impedance: 50Ω Typical

Frequency Counter:
- Range: 5Hz to 150MHz
- Accuracy: Time Base accuracy±1count
- Time Base: ±20ppm (23°C±5°C)
- Resolution: The maximum resolution is: 100nHz for 1Hz, 0.1Hz for 100MHz.
- Input Impedance: 1kΩ/1pf
- Sensitivity: 35mVrms ~ 30Vms (5Hz to 150MHz)
- Ground Isolation: 42Vpk max

Dual Channel:
- Function (CH1/CH2):
  - Phase: -180°~180°
  - Synchronize phase
  - Track: CH2=CH1
  - Frequency(Ratio or Difference)
  - Amplitude & DC Offset
  - Coupling: Dsolink
- Save/Recall: 10 Groups of Setting Memories
- Interface: LAN (MFG-22XX only), USB
- Display: 4.3″ TFT LCD 480 x 3(RGB) x 272

General Specifications:
- Power Source: AC100~240V, 50~60Hz or AC100~120V, AC220~240V, 50~60Hz
- Power Consumption: 30W or 80W (With power amplifier)
- Operating Environment:
  - Temperature to satisfy the specification: 18~28°C
  - Operating temperature: 0~40°C
  - Relative Humidity: ≤80%, 0~40°C; ≤70%, 35~40°C
- Installation category: CAT II
- Operating Altitude: 2000 Meters
- Pollution Degree: IEC 61010 degree 2, Indoor use
- Storage Temperature: -10~70°C, Humidity: ≤70%
- Dimensions (WxHxD): 266(W) x 107(H) x 293(D) mm
- Weight: Approx. 2.5kg
- Safety designed to: EN61010-1

Accessories:

GTL-101 x 1(MFG-21XX)
GTL-101 x 2(MFG-22XX)
Quick Start Guide x1
CD (user manual + software) x1
Power cord x1

Series Multi-Channel Function Generator MFG-2260MRA