Digital storage oscilloscope | Series Mixed-domain Oscilloscopes MDO-2102AG | DCT

300/200/100MHz bandwidth selections ;2 channels
Real time sampling rate is 2GSa/s max.
Per Channel 20M memory depth and VPO waveform display technology
Waveform update rate up to 120,000 wfms/s
8 “ WVGA TFT LCD display
Maximum 1M FFT provides higher frequency domain resolution measurements
High ,low and band pass filter functions
29,000 segmented memories and waveform search functions
I2C/UART/CAN/LIN serial bus trigger and decoding function
Data log function is able to track signal changes up to 1000 hours
Network storage function
Mask test function
MDO-2000AG equips with a dual channel 25MHz AWG

MDO-2000A is an advanced version of MDO-2000E. The selectable bandwidth range is upgraded to 300MHz. The full bandwidth ranges include 300MHz, 200MHz and 100MHz. The sampling rate has upgraded to Max. 2GSa/s and the memory depth has also been upgraded to 20M/CH. Hence, the three major specifications of oscilloscopes have been improved. The new models of the series feature 2 channels including MDO-2000A and MDO-2000AG. The entire series offers the functions of oscilloscope and spectrum analyzer. On top of that, MDO-2000AG features a dual-channel 25MHz arbitrary waveform generator. The new generation MDO-2000A series provides better sampling rate and memory depth for users to obtain more realistic signal integrity, and higher bandwidth selections meet the measurement requirements of higher frequencies.

Model Variants

MDO-2102A

Bandwidth: 100 MHz
Channels: 2 analog channels + 1 external trigger input
Rise Time: 3.5 ns
Bandwidth Limit Option: 20 MHz
AWG (Arbitrary Waveform Generator): Not included

MDO-2102AG

Bandwidth: 100 MHz
Channels: 2 analog channels + 1 external trigger input
Rise Time: 3.5 ns
Bandwidth Limit Option: 20 MHz
AWG (Arbitrary Waveform Generator): Included (Dual channel, 25 MHz)

MDO-2202A

Bandwidth: 200 MHz
Channels: 2 analog channels + 1 external trigger input
Rise Time: 1.75 ns
Bandwidth Limit Options: 20 MHz, 100 MHz
AWG: Not included

MDO-2202AG

Bandwidth: 200 MHz
Channels: 2 analog channels + 1 external trigger input
Rise Time: 1.75 ns
Bandwidth Limit Options: 20 MHz, 100 MHz
AWG: Included (Dual channel, 25 MHz)

MDO-2302A

Bandwidth: 300 MHz
Channels: 2 analog channels + 1 external trigger input
Rise Time: 1.17 ns
Bandwidth Limit Options: 20 MHz, 100 MHz, 200 MHz
AWG: Not included

MDO-2302AG

Bandwidth: 300 MHz
Channels: 2 analog channels + 1 external trigger input
Rise Time: 1.17 ns
Bandwidth Limit Options: 20 MHz, 100 MHz, 200 MHz
AWG: Included (Dual channel, 25 MHz)

Vertical System

Resolution: 8-bit
Sensitivity: 1mV~10V/div
Input Coupling: AC, DC, GND
Input Impedance: 1MΩ // 16pF approx.
DC Gain Accuracy:
- ±3% (≥2mV/div)
- ±5% (1mV/div)
Polarity: Normal & Invert
Max Input Voltage: 300Vrms, CAT I
Offset Position Range:
- 1mV~20mV/div: ±0.5V
- 50mV~200mV/div: ±5V
- 500mV~2V/div: ±25V
- 5V~10V/div: ±250V

Waveform Processing

Arithmetic: +, −, ×, ÷, FFT, User Defined Expressions
FFT:
- Length: 1Mpts
- Vertical Scale: Linear RMS or dBV RMS
- Windows: Rectangular, Hamming, Hanning, Blackman

Trigger System

Sources: CH1, CH2, Line, EXT
Modes: Auto (Roll mode supported), Normal, Single Sequence
Types:
- Edge
- Pulse Width (Glitch)
- Video
- Pulse Runt
- Rise & Fall (Slope)
- Alternate
- Timeout
- Event-Delay (1~65535 events)
- Time-Delay (4ns~10s)
- Bus
Holdoff Range: 4ns~10s
Coupling: AC, DC, LF rej., HF rej., Noise rej.

External Trigger

Range: ±15V
Sensitivity:
- DC~100MHz: ~100mV
- 100MHz~300MHz: ~150mV
Impedance: 1MΩ ±3% // 16pF

Horizontal System

Timebase: 1ns/div ~ 100s/div (1-2-5 steps), ROLL: 100ms/div ~ 100s/div
Pre-trigger: Max 10 divisions
Post-trigger: Max 2,000,000 divisions
Accuracy: ±50ppm (≥1ms interval)

Sampling & Acquisition

Sample Rate: Max. 2GSa/s
Record Length: 20Mpts/channel
Modes: Normal, Average, Peak Detect, Single
Peak Detection: 2ns (typical)
Average: 2 to 256 samples

X-Y Mode

X-Axis Input: Channel 1
Y-Axis Input: Channel 2
Phase Shift: ±3° at 100kHz

Cursors & Measurement

Cursor Types: Amplitude, Time, Gating
Units: Seconds, Hz, Degree, Ratio (%)
Auto Measurements: 38 types (e.g., Pk-Pk, RMS, Frequency, Duty Cycle, Phase)

Control Panel Functions

Auto Counter: 6-digit, 2Hz to rated bandwidth
Autoset: One-button setup with undo
Save Setup: 20 sets
Save Waveform: 24 sets

Display

Type: 8″ TFT LCD WVGA color
Resolution: 800×480 pixels
Interpolation: Sin(x)/x
Waveform Display: Dots, vectors, variable/infinite persistence
Update Rate: Max 120,000 wfms/sec
Graticule: 8 x 10 divisions
Modes: YT, XY

Interfaces

USB Ports:
- 1× USB 2.0 High-speed host
- 1× USB 2.0 High-speed device
Ethernet: RJ-45, 10/100Mbps
Go-NoGo BNC: 5V Max/10mA, TTL output
Kensington Lock: Yes

Spectrum Analyzer (MDO-2000AG only)

Frequency Range: DC~1GHz (uncalibrated)
Span: 1kHz~1GHz
RBW: 1Hz~1MHz
Reference Level: −50dBm to +40dBm (5dBm steps)
Vertical Units: dBV RMS, Linear RMS, dBm
Scale: 1dB/div to 20dB/div
Noise Level (Avg = 16):
- 1V/div: < −50dBm
- 100mV/div: < −70dBm
- 10mV/div: < −90dBm
Spurious Response:
- 2nd Harmonic: < 40dBc
- 3rd Harmonic: < 45dBc
Trace Types: Normal, Max Hold, Min Hold, Average (2–256)
Detection: Sample, +Peak, −Peak, Average
FFT Windows:
- Hanning: 1.44
- Rectangular: 0.89
- Hamming: 1.30
- Blackman: 1.68

Arbitrary Waveform Generator (AG models only)

Channels: 2
Sample Rate: 200MSa/s
Resolution: 14-bit
Max Frequency: 25MHz
Waveforms: Sine, Square, Pulse, Ramp, DC, Noise, Sinc, Gaussian, Lorentz, etc.
Output Range:
- HighZ: 20mVpp to 5Vpp
- 50Ω: 10mVpp to 2.5Vpp
Output Accuracy: 2% at 1kHz
Offset:
- HighZ: ±2.5V
- 50Ω: ±1.25V

AWG Signal Specs

Sine: 100mHz~25MHz, ±0.5dB <15MHz
Distortion:
- Harmonic: −40dBc
- Non-Harmonic: −40dBc
- THD: 1%
- SNR: 40dB
Square/Pulse:
- Freq: 100mHz~15MHz
- Rise/Fall: <15ns
- Duty: 0.4%~99.6%
- Min Pulse Width: 30ns
- Jitter: 500ps
Ramp:
- Freq: 100mHz~1MHz
- Linearity: 1%
- Symmetry: 0–100%