Serial Connectivity Series Industrial Serial to Fiber Media Converter IFC-Serial-PRO-E

Features

Supports 1x Fiber and 1x RS485
Extend serial transmission distance up to 500m, 2km, 20km
Supports fiber port point to point (Figure 3)
Redundant dual power inputs (12/24/48VDC)
Protocol transparent. These products can be applied to the PROFIBUS, but also can be applied to other network using RS485 interface
CE, FCC, heavy industrial grade EMS, EMI, EN61000-6-2, EN61000-6-4 certified
Supports relay output for power or link failure warning
Hardened housing with IP30 protection
Fanless and DIN-Rail design for harsh industrial environment

Application

Figure 1 : IFC-Serial-PRO Application for PROFIBUS

Benefit:
1. EMC/noise isolation, to reduce mutual interference between serial port de vice
2. Extend distance by fiber
3. Isolate PROFIBUS failure
4. Achieve a reliable network environment

Figure 2 : Isolate PROFIBUS Failure

Figure 3 : Fiber Point to Point topology & application

1x RS485 to 1-port Fiber (SC/ST) Media Converter, support PROFIBUS

IFC-Serial-PRO is a serial over fiber converter that is capable of selecting interface modes for connection to RS-485 2-wire half duplex and supports high-speed data rates of PROFIBUS. Fiber optical cabling extends distances and isolates from EMC/noise to reduce interference between PROFIBUS devices. The terminal block offers an alarm relay contact and two redundant DC power inputs.

IFC -Serial-PRO is also available in two operating temperature ranges, a standard -10° to 60°C commercial temperature range and an extended -40° to 75°C range, making it is reliable and an ideal solution for keeping your industrial automation applications running smoothly and continuously even in harsh environments. IFC-Serial-PRO is protocol transparent, and can be applied to PROFIBUS and other networks using RS485 interfaces.

Specifications

FieldBus Protocol	Protocol Transparent	PROFIBUS and all operations available on RS485
Problem Isolation	Isolate EMC/noise to reduce mutual interference between PROFIBUS device (Figure 1) Isolate the PROFIBUS side of the failure, to avoid the impact of the other side (See Figure 2 )
Fiber Port Interface	Connector	SC, ST
	Fiber Port	1 fiber port
	Fiber Type	M/M 500M, M/M 2KM, S/M 20KM Bidi 20KM
	Wavelength	M/M 850nm or 1310nm, S/M 1310nm Bidi: Mode A : TX1310nm/RX1550nm Mode B : TX1550nm/RX1310nm
Fiber Port Topology	Point to Point (Figure 3)
Serial Port Interface	Serial Port Connector	DB9 Female
	Serial Port Connector	RS-485 : 2 wires, Half duplex
	RS-485 Direction	Automatically detection
	Serial Port Baudrate	9.6K to 12Mbps Auto mode : Auto sense Baudrate, no need to set Baudrate Manual Mode : Baudrate Set by DIP SW
	Serial Port Isolation	2.5KVrms isolation for serial signals EMC/noise isolation, to reduce mutual interference between serial port device

Environmental	Operating emperature	-10 ~ 60°C (IFC-Serial-PRO) -40 ~ 75°C (IFC-Serial-PRO-E)
	Storage Temperature	-40 ~ 85°C
	Humidity	5 ~ 95% RH
LED Indications	PWR1, PWR2, Alarm, Master, TD, RD, Fiber Link, System
Alarm Relay	Alarm exists for power, fiber link or ring protection, Relay output with carry capacity 1A @ 24VDC
Power	Power Input	Redundant Dual Power 12, 24, 48 VDC (9.6 ~ 60VDC)
	Power Consumption	<6W
	Power Reversal Protection	Yes
	Over Current Protection: Signal Short Together Protected
Terminal Block	For Power and Alarm
	V1+, V1-, V2+, V2-, Alarm NC, Alarm COM
Mechanical	Water & Dust Proof	IP30 Protection, Fanless
	Dimensions	85 x 30 x 115mm (D x W x H)
	Mounting	DIN-Rail or wall mounting (Optional)
	Weight	295g
Certification
EMC	CE (EN55032, N55035)
EMI	FCC Part 15 Subpart B Class A, CE (EN55032)
EMS (Electromagnetic Susceptibility) Protection Level	EN61000-4-2 ESD Level 3
	EN61000-4-3 RS Level 3
	EN61000-4-4 EFT Level 3
	EN61000-4-5 Surge Level 3
	EN61000-4-6 CS Level 3
Free Fall	IEC 60068-2-31
Vibration	IEC 60068-2-6
Shock	IEC 60068-2-27
Green	RoHS
MTBF	1,137,875 Hours (MIL-HDBK-217)
Warranty	5 years

Serial Connectivity Series Industrial Serial to Fiber Media Converter IFC-Serial-PRO-E