DCT | Test and Measurement

Welcome to our new site! Feel free to report any issues, contact us at [email protected]

Call 03-923-2277
Call Us

Dial 03-923-2277 and talk to a representative

USB oscilloscope Handyscope HS3-AWG-10

  • DCT | Test and Measurement
  • Products
  • USB oscilloscope Handyscope HS3-AWG-10
    • Handyscope_HS3
    Handyscope_HS3_Front
    HP-3250I
    Handyscope_HS3_CompleteSet
    TP-RP-HS-YellowOnHS3Front
    Handyscope_HS3_Rear

    USB oscilloscope Handyscope HS3-AWG-10

    • All-in-One Measurement Solution
      The HS3-AWG-10 combines five essential instruments: oscilloscope, voltmeter, spectrum analyzer, transient recorder, and a 14-bit arbitrary waveform generator.

    • High-Precision Data Acquisition
      Features two analog channels, 100 MS/s sample rate, and up to 16-bit resolution—delivering accurate and detailed signal measurements even in complex applications.

    • 14-bit AWG with ±12 V Output
      Built-in arbitrary waveform generator outputs up to ±12 V with 256 Kword memory, supporting user-defined signals and playback up to 10 MHz.

    • User-Friendly Software Integration
      Operated via Windows software with advanced triggering, graphical adjustments, real-time zoom, and support for LabVIEW, Visual Studio, and CSV export.

    • Compact and USB Powered
      At just 480 g and powered via USB, the HS3-AWG-10 is ideal for mobile diagnostics, fieldwork, education, or any application requiring portable signal analysis.

    Send Enquiry

    Send Inquiry

    • USB 2.0 and USB 1.1 compatible

    • 2 analog input channels

    • 100 MS/s maximum sample rate

    • Up to 16-bit vertical resolution

    • ±80 V maximum input range

    • 14-bit AWG with ±12 V output

    • Trigger modes: edge, window, peak, external

    • Export data in CSV for easy spreadsheet analysis

    • Free software and firmware updates

    • Supports multiple device synchronization via special cable

    The TiePie Handyscope HS3 is a high-performance, multi-functional USB oscilloscope designed for engineers and technicians who demand precision and portability. Combining four essential instruments—oscilloscope, spectrum analyzer, voltmeter, and transient recorder—into a compact, USB-powered device, the HS3 sets the benchmark for plug-and-play measurement solutions. With 100 MS/s sampling rate, up to 16-bit resolution, and a 128 Kbyte memory per channel, this powerful tool ensures accurate measurements across a wide range of applications from serial communication to industrial diagnostics.

    Equipped with a 14-bit Arbitrary Waveform Generator (AWG) featuring 256 Kbyte memory and ±12 V output, the HS3 allows users to create custom test signals or replicate recorded waveforms. The intuitive, object-oriented Windows software provides extensive visualization tools, advanced triggering (including window and peak modes), and seamless integration of all measuring functions for synchronized data analysis.

    Whether used for field diagnostics or laboratory research, the HS3’s lightweight design (480g) and palm-sized dimensions (25 x 170 x 140 mm) make it exceptionally portable. Its USB 2.0 compatibility ensures high-speed data transfer, while included example software and DLLs allow for custom development and automation in environments like LabVIEW or Visual Studio.

    The Handyscope HS3 is the ideal choice for professionals seeking reliability, versatility, and mobility in a single measurement instrument.

    The tables below show detailed specifications of the Handyscope HS3.

    Acquisition system
    Number of input channels 2 analog
    CH1, CH2 BNC, female
    Type Single ended
    Resolution User selectable in software
    Native 8, 12 bit
    Enhanced 14, 16 bit
    Accuracy 0.2 % of full scale ± 1 LSB
    Ranges (Full scale) ±200 mV
    ±400 mV
    ±800 mV    		 ±2 V
    ±4 V
    ±8 V    		 ±20 V
    ±40 V
    ±80 V
    Coupling AC/DC
    Impedance 1 MΩ / 30 pF
    Noise 210 µVrms (200 mV range, 12 bit, 50 MSa/s)
    50 µVrms (200 mV range, 16 bit, 195 kSa/s)
    Maximum input voltage (in all ranges) 200 V (DC + AC peak < 10 kHz)
    Maximum input voltage 1:10 probe (in all ranges) 600 V (DC + AC peak < 10 kHz)
    Bandwidth (-3dB) DC to 50 MHz maximum
    AC coupling cut off frequency (-3dB) 1.5 Hz
    Maximum sampling rate HS3-100 HS3-50 HS3-25 HS3-10 HS3-5
    8 bit 100 MSa/s 50 MSa/s 25 MSa/s 10 MSa/s 5 MSa/s
    12 bit 50 MSa/s 50 MSa/s 25 MSa/s 10 MSa/s 5 MSa/s
    14 bit 3.125 MSa/s 3.125 MSa/s 3.125 MSa/s 3.125 MSa/s 3.125 MSa/s
    16 bit 195 kSa/s 195 kSa/s 195 kSa/s 195 kSa/s 195 kSa/s
    Maximum streaming rate 10 kSa/s
    Sampling clock source
    Internal Quartz
    Accuracy ±0.01 %
    Stability ±100 ppm over -40 °C to +85 °C
    Time base aging ±5 ppm/year
    External Extension connector
    Memory
    8 bit 256 Kpts channel
    12, 14, 16 bit 128 Kpts per channel
    Trigger Only available in scope/block mode, not in streaming mode
    System Digital, 2 levels
    Source CH1, CH2, OR, digital external
    Generator start, Generator new period, Generator stop
    Trigger modes Rising edge, Falling edge
    Inside window, Outside window
    Level adjustment 0 to 100 % of full scale
    Hysteresis adjustment 0 to 100 % of full scale
    Resolution 0.025 % (12 bits)
    Pre trigger 0 to 128 KSamples, 1 sample resolution
    Post trigger 0 to 128 KSamples, 1 sample resolution
    Digital external trigger
    Input Extension connector
    Range 0 to 3.3 V (5 V max)
    Coupling DC

    Arbitrary Waveform Generator (independent from acquisition system)
    Waveforms Sine, triangle, square, DC, noise and arbitrary
    Number of output channels 1 analog, female BNC
    DAC resolution 14 bit @ 50 MSa/s
    Output range -12 V to 12 V
    Amplitude
    Range 0.12 V 1.2 V 12 V
    Resolution 13 bit
    Accuracy 0.4 %
    DC offset
    Range -12 V to 12 V
    Resolution 13 bit
    Coupling DC
    Impedance 50 Ω
    Bandwidth DC to 2 MHz
    Noise level 0.12 V range
    900 µV RMS    		 1.2 V range
    1.3 mV RMS    		 12 V range
    1.5 mV RMS
    Sweep –
    System characteristics
    System DDS
    Memory 256 KiSamples
    Maximum Sampling rate 50 MHz
    Sampling source internal
    Accuracy ±0.01 %
    Stability ±100 ppm over -40 °C to +85 °C

    Interface
    Interface USB 2.0 High Speed (480 Mbit/s); (USB 1.1 Full Speed (12 Mbit/s) and USB 3.0 compatible)

    Power Requirements
    Power from USB port 500 mA max (2.5 W max)
    Power via external power input / extension connector 1500 mA max (7.5 W max)
    Minimum voltage 4.5 VDC
    Maximum voltage (SN# <12941) 6 VDC
    Maximum voltage (SN# >12941) 12 VDC

    Physical
    Instrument height 25 mm (1 inch)
    Instrument length 170 mm (6.7 inch)
    Instrument width 140 mm (5.2 inch)
    Cord length 1.8 m (70 inch)
    Weight 480 g (17 ounce)

    I/O connectors
    Channel 1, 2 BNC, female
    Generator BNC, female
    USB fixed cable with USB 2.0 and USB 1.1 type A connector
    Extension connector D-sub 25 pins female

    System requirements
    PC I/O connection USB 2.0 High Speed (480 Mbit/s); (USB 1.1 Full Speed (12 Mbit/s) and USB 3.0 compatible)
    Operating System Windows 10 / 11, 64 bits
    Linux (via libtiepie-hw SDK)

    Operating environment
    Ambient temperature 0 to 55°C
    Relative humidity 10 to 90%, non condensing

    Storage environment
    Ambient temperature -20 to 70°C
    Relative humidity 5 to 95%, non condensing

    Certifications and Compliances
    CE mark compliance yes
    RoHS yes

    Package
    Instrument Handyscope HS3
    Oscilloscope probes 2 x Oscilloscope Probe 1:1-1:10 – HP-3250I
    Accessories external power cable for second USB port
    Software for Windows 10 / 11, 64 bits, via website
    Drivers for Windows 10 / 11, 64 bits, via website
    Software Development Kit for Windows 10 / 11, 64 bits, and Linux, via website
    Manuals instrument manual and software user’s manuals
    color printed and digital, via website

    Options
    Optionally available 10 MHz generator output
    USB Oscilloscope Handyprobe HP3-20XMPS
    USB Oscilloscope Handyprobe HP3-20XMPS
    Read more
    WiFiScope WS5 WiFi oscilloscope WS5-540XMS
    , ,
    WiFiScope WS5 WiFi oscilloscope WS5-540XMS
    Read more
    Handyprobe HP3
    , ,
    Handyprobe HP3
    Condition

    New
    Read more
    Instrument Handyscope HS3
    Probe 2x Oscilloscope Probe 1:1-1:10 – HP-3250I
    Accessories external power cable for USB port
    Software for Windows 10 / 11, 64 bits, via website
    Drivers for Windows 10 / 11, 64 bits, via website
    Software Development Kit for Windows 10 / 11, 64 bits, and Linux, via website
    Manuals instrument manual and software user’s manuals
    color printed and digital, via website

    Enjoy:

    • Nearly 30 Years of Experience
    • Reliable Suppliers
    • Quality Products
    • Free Technical Consultation
    • Tailoring Custom Solution
    • Expert Technical Support
    • No Hidden-Fees

    Send Enquiry For:

    USB oscilloscope Handyscope HS3-AWG-10

    Israel's Leading Businesses Choose DCT

    Israel's Leading Businesses Choose DCT

    DCT’s Skilled Management Team has more than twenty-five years of experience and expertise in the local business environment, coupled with a highly motivated group of employees, positions us as the preferred supplier among the major customers in the industry.

    DCT Competitive Edge is the prompt response to our customer needs, the online and on-site direct technical support, professional consulting for the best cost/performance solution, on-time delivery, long-term maintenance, and support.

    More About Us

    Still Conflicted? Let's Talk.

    +972 (0) 3-923-2227
    Don’t hesitate to contact us
    +972 (0) 54-420-1920
    For Emergencies

    We can get back to you!

    Need a Rugged Device?

    Fill in the form!

    A variety of tablets are available for all use cases.
    - only solutions - No obligations -

    Our experts can help you find just about anything.

    What Were You Looking For? Let us help.