In-Band Managed FE Media Converter FRM220-10/100i

1-Port Conversion 10/100Base-TX to 100Base-FX.
Auto-Negotiation Supports auto or forced mode.
Power Fail Detection Remote CPE “dying gasp.”
Fault Indication Far End Fault Indication (FEFI).
Link Fault Pass-Through LFPT support.
Loopback Test Built-in loopback testing.
RMON Counters Monitors network performance.
Auto Laser Shutdown Protects laser from damage.
Auto MDI/MDIX Detects crossover cables automatically.
Packet Forwarding 2046 bytes (switch mode), 9K jumbo (converter mode).
Q in Q Supports double-tagged frames.
VLAN Tagging Passes IEEE 802.1q frames.
In-Band Management SNMP for remote/local config.
Bandwidth Control Nx32Kbps or Nx512Kbps options.
Flow Control Supports IEEE 802.3x (Pause).
Fiber Reset Includes Fiber Hardware Reset.
Firmware Upgrade Remote/local updates.

The FRM220-10/100i is a 10/100Base Ethernet to 100Base-FX fiber slide-in card converter designed for central and remote applications. With advanced features like bandwidth control, this media converter is targeted for customer premises equipment in metro LAN, campus, enterprise and FTTx applications. By offering in-band management, this converter can be completely controlled and monitored from a centrally located managed rack controlling all converter settings including bandwidth control, duplex, and speed configuration. This media converter is completely transparent to Layer 2 and Layer 3 protocols including IEEE 802.1q, VLAN tag, Q in Q, STP, IPX, IP, etc. When used stand-alone, this converter has no access to management functions except to force Ethernet connection and apply Link Fault Passthru via setting of a 4-pole DIP switch.

Specifications

Optical Interface	Connector	1 × 9 (SC, ST, FC)
	Data rate	125Mbps
	Duplex mode	Full duplex
	Fiber	MM 50/125μm, 62.5/125μm
	Fiber	SM 9/125μm
	Distance	MM 2km, SM 15/30/50km
	Distance	WDM 20/40km
	Wavelength	MM 1310nm, SM 1310, 1550nm
		WDM 1310Tx/1550Rx (type A)
		1550Tx/1310Rx (type B)
Electrical Interface	Connector	RJ45
	Data rate	10Mbps, 100Mbps
	Duplex mode	Half / Full duplex
	Cable	10Base-T Cat.3, 4, 5, UTP
	Cable	100Base-TX Cat.5, 5e or higher
Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Indications	LED (Power, FEF, FX-Link, TX-SPD, TX-Duplex, TX-Link)
Power Input	12VDC
Power Consumption	< 6W

Dimensions	159.5 × 20.8 × 88mm (D×W×H)
Weight	120g
Temperature	0 ~ 50°C (Operating), -10 ~ 70°C (Storage)
Humidity	10 ~ 90% non-condensing
Certification	CE, FCC
MTBF	65,000 hrs