4 Bridge signal conditioning channels with programmable gain and filters accommodate 1, 2 or 4 active bridge arms
	2 Additional frequency measurement channels
	10BaseT Ethernet connectivity to your PC or laptop for setup, data display and processing
	Wireless Ethernet available
	16-bit analog-to-digital converter resolution
	Maximum sampling rate of up to 50k samples/second
	Simple user interface allows quick setup for data collection and storage
	Local data storage via CompactFlash™ module
	Auto-configuration on power-up for stand-alone applications
	External trigger input provided

The DAQ504 is a complete 4-channel multiplexed signal conditioning system with a 16-bit resolution ADC and 10BaseT Ethernet connectivity to a PC or laptop for setup, data display and processing. The ultra-compact 67.7mm (2.64") high, 112mm (4.41") wide, 220mm (8.66") deep fully enclosed chassis weigh only 1.13kg (2.5lbs), making it suitable for in-vehicle applications. The DAQ504 chassis can be powered from DC voltage sources ranging from 10-18 volts. Power consumption is 18 watts for typical configurations. Local data storage is available via a CompactFlashT module. Auto configuration on power-up provides standalone capability and along with the simple user interface makes data collection and storage a quick and easy process.

Signal conditioning consists of 4 bridge signal conditioning channels that can accommodate 1, 2 or 4 active bridge arms. These channels provide programmable gain from 1 to 1000 with pre-filter gains of 1,10,100 and 1000 as well as post-filter gains of 1,2,5 and 10. Each channel also includes a programmable Butterworth filter with cutoff frequencies of 10, 50 and 500 Hz. Each filter can also be bypassed.