DCT | Test and Measurement

Welcome to our new site! Feel free to report any issues, contact us at [email protected]

IT-M3800 Regenerative DC Electronic Load

IT-M3800 Regenerative DC Electronic Load

IT-M3800 series regenerative DC electronic load can not only perform as a DC load, but also feed back power to the grid, which saves electricity and cooling costs for you.

Sub-models available, up to 720A, 80V and 12KW. Contact us for more info.

It can complete high-precision output and measurement, and supports multiple protection functions. It is well applied to the test of 5G communication and data center, industrial components test, aging test, PV and energy storage test, power optimizer and other fields.

Send Enquiry


  • Compact design, 1U@6kW, 2U@12kW
  • Voltage range: 10~1500V
  • Current range: 8A~720A
  • Power range: 12kW
  • Master/slave parallel connection with parallel echnology – keep good performance while power extension*1
  • Efficient power regeneration – reduce cost of electricity and cooling
  • Slope of voltage, current and power is settable
  • Battery discharge test
  • Short-circuit simulation
  • List function, max.200 steps
  • 8 operation modes under Source mode:CC/CV/CW/CP/CC+CV/CV+CR/CR+CC/CC+CV+CW+CR
  • Von function – On/Off control
  • Multiple protection: OVP / ±OCP / ±OPP / OTP /voltage transient drop protection/anti-islanding
  • Power grid automatic detection
  • Pre-charge to prevent current overshoot
  • Built-in USB/CAN/LAN/digital IO interfaces, Optional GPIB/Analog&RS232
    *If parallel connection > 6 units, pls. contact ITECH for details.


High power density, compact size design

ITECH has been adhering to the high power density design to help customers optimize test solutions. IT-M3800 series provide up to 6kW power in 1U chassis, and up to 12kW power in 2U chassis. ITECH entire high power density product line is more complete and comprehensive.

Wide range of output, one unit replaces multiple units

IT-M3800 series, with 25 models, the output voltage ranges from 10V to 1500V, and the maximum output current of a single unit can reach 720A. With a wide range of output design, compared with the traditional solid output range, IT-M3800 provides users with more voltage and current combinations, making the usage more flexible. A single load can cover a wide range of application needs, and significantly reduce the complexity and space occupied by the system.

Power regenerative and eco-friendly

With the power regeneration function, IT-M3800 can feed back up to 95% power instead of consuming it as heat. It not only saves your cost of electricity, HVAC
and cooling infrastructure, but also help to reduce carbon emission and impact on the environment. In addition, IT-M3800 has the function of automatic grid detection, which can detect phase voltage and frequency in real-time and synchronizes with the grid to make energy regeneration automatic and safe.

Electricity accumulation, high energy saving effect

IT-M3800 uses power electronic conversion technology to recycle the output energy of the power supply under test under the premise of completing the test power experiment. Through the internal high-speed voltage and current sampling, the user can directly view the total amount of feedback on the instrument panel, including the voltage/frequency/power of each phase. The total power, real time, and historical total recovered electricity. The IT-M3800 series can continue to accumulate electricity on the basis of the value before the last shutdown.

Battery discharge test

The IT-M3800 series have discharge test function, which is suitable for discharging tests on various portable batteries. Three test cut-off conditions of the battery can be set by yourself: cut-off voltage, cut-off capacity and discharge time. When any one of the three conditions is met, the test will be automatically interrupted. During the test, the battery voltage, discharge time and discharged capacity can be observed.

Parallel function

To be convenient and flexible, IT-M3800 uses the master/slave control mode to connect multiple e-loads in parallel to realize high-power testing requirements. Meanwhile, it adopts ITECH’s optical fiber parallel technology to solve the problems of slow speed and poor accuracy in the traditional parallel mode, suitable for calibration measurement, research and development lab, production line and ATE test setup.

Leave a Reply

Your email address will not be published. Required fields are marked *


Send Enquiry For:

IT-M3800 Regenerative DC Electronic Load

Israel's Leading Businesses Choose DCT

Israel's Leading Businesses Choose DCT

DCT’s Skilled Management Team has more than twenty-five years of experience and expertise in the local business environment, coupled with a highly motivated group of employees, positions us as the preferred supplier among the major customers in the industry.

DCT Competitive Edge is the prompt response to our customer needs, the online and on-site direct technical support, professional consulting for the best cost/performance solution, on-time delivery, long-term maintenance, and support.

We can get back to you!

Need a Rugged Device?

Fill in the form!

A variety of tablets are available for all use cases.
- only solutions - No obligations -

Our experts can help you find just about anything.

What Were You Looking For? Let us help.