DCT | Test and Measurement

Welcome to our new site! Feel free to report any issues, contact us at [email protected]

GPS167MP : The ready-to-operate GPS systems built up in rackmount slimline modular cases.

GPS167MP : The ready-to-operate GPS systems built up in rackmount slimline modular cases.

The ready-to-operate systems GPS167-MQ/F4/MP (GPS167-MQ/LCD/F4/MP) and GPS167/ MP (GPS167/LCD/MP) are built up in 19″ slimline modular cases (1U).

Send Enquiry

Features

  • 2 time trigger inputs
  • Pulses per second and per minute
  • LC Display for configuration ( …/LCD/… types only)
  • 2 RS232 interfaces
  • Integrated power supply (85 … 264VAC)
  • Optional (only …/F4/… models): four frequency outputs 2.048MHz direct, 3.0Vpp into 50 Ohm 2.048MHz switched, 3.0Vpp into 25 Ohm 10MHz direct, 3.0Vpp into 50 Ohm 10MHz switched, 3.0Vpp into 25 Ohm
  • Alarm relay output, changeover contact
  • Including GPS antenna, 20m standard cable and printed manual

Overview

The ready-to-operate systems GPS167-MQ/F4/MP (GPS167-MQ/LCD/F4/MP) and GPS167/ MP (GPS167/LCD/MP) are built up in 19″ slimline modular cases (1U).
The frequency locking of the master oscillator to the GPS system enables the module GPS167 to generate fixed and programmable standard frequencies with high accuracy and stability. Various oscillator options allow the cost efficient implementation of different requirements concerning the accurracy of the outputs. The pulse generator of GPS167 generates pulses per second and per minute. As an option three programmable outputs are available. The pulses are synchronized to UTC second.

Up to four serial interfaces are available for sending time strings. These ASCII telegrams include information regarding time, date and status of the GPS receiver. The module provides two inputs for measurement of asynchronous time events. These capture events are shown on the LC display (only LCD models) and can be read via a serial interface.

The front panel of LCD models integrates a LC display that shows information regarding the GPS receiver in different menus. In combination with four push buttons it is also used to setup all configurable parameters.

The ../F4/.. models come with E1/T1 frequency outputs and are widely used in the telecommunicaton sector.

A powerful and feature-rich software called GPSMON is available for configuration and monitoring of your Meinberg GPS receivers.

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Enjoy:

Send Enquiry For:

GPS167MP : The ready-to-operate GPS systems built up in rackmount slimline modular cases.

Israel's Leading Businesses Choose DCT

Israel's Leading Businesses Choose DCT

DCT’s Skilled Management Team has more than twenty-five years of experience and expertise in the local business environment, coupled with a highly motivated group of employees, positions us as the preferred supplier among the major customers in the industry.

DCT Competitive Edge is the prompt response to our customer needs, the online and on-site direct technical support, professional consulting for the best cost/performance solution, on-time delivery, long-term maintenance, and support.

We can get back to you!

Need a Rugged Device?

Fill in the form!

A variety of tablets are available for all use cases.
- only solutions - No obligations -

Our experts can help you find just about anything.

What Were You Looking For? Let us help.