DCT
    Search 
Products Monitor & Control Remote I/O modules
    Client Membership

Receive free newsflash concerning new available technologies and be the first to know about exciting development in DCT 

  name  

  e-mail 
CONTACT US
10 Granit St. P.O.B 7087 Petah Tikva 4951409 Israel.
Phone: 972-3-9232277
Fax:       972-3-9232227
E-Mail: dct.tec@gmail.com Contact us

Follow us on facebook and stay updated about products, services and special offers: facebook.com/DCTLtd10

 
ND-6018

Channels: 6 Differential & 2 Single-ended
Input Type: Thermocouple, mV, V and mA
Thermocouple Type: J, K, T, E, R, S, B, N,C

ND-6017

Channels: 6 Differential & 2 Single-ended
Input Type: mV, V and mA
Input Range: 150 mV, 500 mV, 1 V, 5 V, 10 V

ND-6013

Channels: 3
Input Type: Pt-100, Ni-100 or Ni-120 RTD
Isolation Voltage: 2500 VRMS

ND-6531

Protocol (DIP switch selectable): RS-232 (5-wire: RXD, TXD, RTS, CTS, GND); RS-422 (4-wire: TX+, TX-, RX+, RX-); RS-485 (2-wire: Data+, Data-)
Speed: 1200 ~ 115200 bps (RS-232 and RS-422/485 can set to different baud rate)
Convert RS-422/485 to RS-232 with configurable address

ND-6530

Protocol (DIP switch selectable): RS-232 (5-wire: RXD, TXD, RTS, CTS, GND); RS-422 (4-wire: TX+, TX-, RX+, RX-); RS-485 (2-wire: Data+, Data-)
Speed: 300~115.2k bps
Isolation Voltage: 2500 VRMS

ND-6520

Protocol: RS-422 (4-wire, full-duplex); RS-485 (2-wire, half-duplex) protocol
Speed: 115.2k, 38.4k, 19.2k, 9600, 4800, 2400, 1200, 600, 300
Auto baud rate and data format adjustment

ND-6510

Input: RS-422 (4-wire, full-duplex); RS-485 (2-wire, half-duplex) protocol
Output: RS-422 (4-wire, full-duplex); RS-485 (2-wire, half-duplex) protocol
Speed: 115.2k, 57.6k, 38.4k, 19.2k, 9600, 4800, 2400, 1200, 600, 300

ND-8511(D)

48MHz, 186-Based Controller
Auto sensing 10/100Base-T Ethernet
High speed serial port (up to 230kbps) with hardware and modem flow controls

ND-6067

Interface: RS-485, 2 wires
Output Type: 8 form A
Contact Rating: AC 3 A / 250 V; DC 3 A / 30 V

ND-6063

8-CH relay outputs
Output Type: 8 Form A
Contact Rating: AC: 0.5 A / 125 V; DC: 1 A / 30 V or 0.3 A / 110 V; ON/OFF Interval Time: 3 ms

ND-6060

4-CH relay outputs
Output Type: 2 form C and 2 form A
Contact Rating: AC: 0.6 A / 125 V or 0.3 A / 250 V; DC: 2 A / 30 V or 0.6 A / 110 V

ND-6058

8255 PPI mode 0 emulation
Channels: 24 DIO and 4 DI

ND-6056

Channels: 15
Isolation Voltage: 5000 VRMS
Switching Level: with 24 V common power. Low (0): 22 V min.; High (1): 0-22 V

ND-6054

Channels: 15
Isolation Voltage: 5000 VRMS
Switching Level: with 24 V common power. Low (0): 22 V min.; High (1): 0-22 V

ND-6053

Channels: 16 DI
Channels: 16 DI: Logical 0: close to GND; Logical 1: open; Effective distance: 500m
Wet contact: TTL level

ND-6052

Channels: 8 DI. 6 fully independent isolated; 2 isolated with common ground
Isolated Voltage: 5000 VRMS
Programmable input polarity

ND-6050

Interface: RS-485
7 TTL digital inputs
8 open collector DO

ND-6024

Channels: 4
Voltage Output: -10 V to 10 V
Output Isolation: 5000 VRMS

ND-6021

Voltage Output: 0-10 V
Current Output: 0-20 mA, 4-20 mA
Output Isolation: 5000 VRMS

Home  |  Products  |  Company  |  Technical Library  |  Free Seminar  |  Success Stories

-